This FX Unit uses Omnisphere’s filters with an envelope follower, adding sonic animation to the envelope of a sound. Includes a cool compressor on Page 2 to squash those filtered sounds! Great for use with Clavinets and electric guitars, and anything else you want to liven up.
Controls the mix of the dry signal and the processed (wet) signal. The percentage indicates the amount of the signal that is wet.
PAGE ONE CONTROLS
Controls the depth of the envelope applied to the filter.
Controls the response of the envelope follower. The envelope reacts faster at slower settings and slower at higher settings.
Inverts the contour of the envelope follower.
Drop-down menu determines the filter type.
Controls the amount of filter resonance.
PAGE TWO CONTROLS
Adjusts the filter Cutoff frequency for the chosen filter on Page 1. The higher the SENS value, the more will affect this CUTOFF frequency.
The SPREAD control moves the cutoff frequency in one direction on one side of the stereo field while moving it in the opposite direction on the other side of the stereo field.
Engages and disengages the compressor through which the filter is fed before the output.
Sets the input level to the compressor.
Controls both the threshold and output gain of the compression effect. Higher settings lower the threshold and cause more gain to be made up, while lowering the attack.
Adjusts the amount of time that the compressor takes to stop compressing once the audio has dipped under the threshold level.
A make-up gain stage that adjusts the overall output volume to compensate for compression level reduction.