The Wah-Wah FX unit was modeled after classic wah pedals of the 1970’s. It’s a fun and versatile effect that doesn’t sound like any of the other Omnisphere Filters. This FX unit works both as a sweeping wah-wah and also as an “auto-wah” envelope filter effect by using the controls on Page 2.

PAGE ONE CONTROLS

[SWEEP LFO] RATE

Controls how fast or slow the LFO Sweeps.

When Synced: 16x, 8x, 7x, 6x, 5x, 4x, 3x, 2x, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/2D, 1/4D, 1/8D, 1/16D, 1/2T, 1/4T, 1/8T, 1/16T.

Unsynced: 0 to 8.8Hz

[SWEEP LFO] DEPTH

Controls the sweep range of the LFO sweep. Range: Off to 100%

[SWEEP LFO] SYNC

Engages and Disengages synchronization of the LFO rate with the host’s tempo.

[TONE] FREQ

Controls the Center Frequency range of the filter wah. Range: -10 to +10%

[TONE] Q

Controls the Resonance or emphasis of the wah frequency. Range: -10 to +10%

[TONE] WIDE

A phase reversal that inverts the left and right modulation for a stereo wah effect.

PAGE TWO CONTROLS

[AUTO ENV] THRESHOLD

The audio level at which the Envelope Follower modulation begins. Range 0 to -90dB

[AUTO ENV] ATTACK

The time of the Envelope Follower modulation beginning slope. Range 200 to 8000 ms

[AUTO ENV] RELEASE

The time of the Envelope Follower modulation ending slope. Range 25 to 1500 ms

[AUTO ENV] POLARITY

The polarity of the Envelope Follower modulation. Choices: HIGH/LOW, LOW/HIGH

SOURCE

Drop-down menu that allows a choice between LFO and AUTO-ENV as source of Wah-wah modulation.

LEVEL

Adjusts the overall output volume. Range: 0 to 13 dB.