The PRO-Phaser FX unit is one of the most versatile and richest phaser designs ever. It is also capable of producing a wide array of unique sounds beyond traditional phaser effects – including tuned resonances, strange pitch bending effects and envelope followed phasing – to name a few!

MINI-SLIDER

Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet. Range: 0 to 100%

PAGE ONE CONTROLS

[LFO] RATE

Controls how fast or slow the LFO cycles.

Range:

Synced: 32x,16x, 8x, 7x, 6x, 5x, 4x, 3x, 2x, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/96, 1/1dot, 1/2dot, 1/4dot, 1/8dot, 1/16dot, 1/1triplet, 1/2triplet, 1/4triplet, 1/8triplet, 1/16triplet.

Unsynced: 0.00Hz to 15.000Hz

[LFO] MIN

Controls the minimum point of modulation depth of the LFO. Range: 0 to 100%

[LFO] MAX

Controls the maximum point of modulation depth of the LFO. Range: 0 to 100%

POLES

Drop down menu that selects how many stages or “poles” the phaser uses. More poles equals a more resonant sound character.

Choices: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 poles

SYNC

Engages and Disengages synchronization of the LFO rate with the host’s tempo.

WIDTH

Controls the width of the stereo image of the phasing signal. Range: 0 to 360 degrees

FEEDBACK

Controls the amount of resonance/feedback of the phaser. High settings will oscillate.

Range: 0 to 100%

PAGE TWO CONTROLS

SOURCE

Continuous mix control to blend between LFO and Envelope Follower modulaion sources.

Range: 0 to 100%

[ENVELOPE] ATTACK

The time of the Envelope Follower modulation beginning slope. Range: 0 to 400ms

[ENVELOPE] RELEASE

The time of the Envelope Follower modulation ending slope. Range: 0 to 1000ms

[ENVELOPE] MIN

Controls the minimum point of modulation depth of the Envelope. Range: 0 to 100%

[ENVELOPE] MAX

Controls the maximum point of modulation depth of the Envelope. Range: 0 to 100%

DRIVE

Controls the amount of overdrive at the final output. Range: 0 to 100

LEVEL

Adjusts the overall output volume. Range: -200 to +10db