Contrary to what you might expect, EZ-Phaser is not a simplified version of the PRO-Phaser, but an entirely different phaser design with it’s own unique sonic character. EZ-Phaser is best suited to recreating classic phaser effects and it is very simple to use and understand.


Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet. Range: 0 to 1


Controls how fast or slow the Phaser cycles.


Synced: 32x,16x, 8x, 7x, 6x, 5x, 4x, 3x, 2x, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/96, 1/1dot, 1/2dot, 1/4dot, 1/8dot, 1/16dot, 1/1triplet, 1/2triplet, 1/4triplet, 1/8triplet, 1/16triplet.

Unsynced: 0.00Hz to 15.000Hz


Controls how wide the sweep range of the LFO will be. Range: 0 to 1


Engages and Disengages synchronization of the LFO rate with the host’s tempo.


Drop down menu that selects how many stages or “poles” the phaser uses. More poles equals a more resonant sound character.

Choices: Four or Eight poles


Controls the center frequency of the phaser. Range: 0.005 to 0.1


Controls the amount of resonance/feedback of the phaser. Range: 0 to 1


Adjusts the overall output volume. Range: -infinity to 0 Unity gain.