The Spring Verb unit was included in the Omnisphere FX family because we felt that our other reverbs in Omnisphere were sounding too good! This unit faithfully recreates the cheesy vibe of the ancient spring reverbs of 1960’s era guitar amplifiers. It’s a limited effect to be sure, but when you have need of a retrosonic blast from the past – this baby’s more than up to the challenge!
Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet. Range: 0 to 100%
PAGE ONE CONTROLS
Controls the length of the reverb. Range: 0 to 100%
Controls the basic tone color of the reverb character. Range: -10 to +10
Controls the stereo width of the audio. Full left is Mono, Center is normal stereo and full right is ultra-wide “fake” Stereo.
PAGE TWO CONTROLS
Engages and disengages the EQ Tone controls.
Controls the amount of low frequencies. Range: -15 to +15 dB
Controls the amount of high frequencies. Range: -15 to +15 dB
Allows you to position the EQ before or after the reverb. Choices: PRE or POST
Adjusts the overall output volume. Range: -24 to +24 dB