Search
Related topics are listed below.
Concepts
Concepts
Omnisphere has been designed to accommodate a wide range of operations, from basic interaction with Factory Patches to comprehensive and complex sound design. The Omnisphere interface provides an intuitive workflow which offers all the depth and flexibility you…
MIDI Learn Concepts
Concepts » MIDI Learn and Automation » MIDI Learn Concepts
MIDI Learn is an immensely powerful feature that allows you to remote control virtually any on-screen parameter (including FX menu selections) with a MIDI controller. It is a very flexible system that can adapt to the MIDI device you use and allows changes made to…
Remote Loading of Sounds
The Browsers » Operation » Remote Loading of Sounds
Loading sounds remotely can be very handy in live and studio situations. In addition to using Omni TR, you can achieve this by using any MIDI controller. This section will cover how to do it via MIDI using a variety of messages: Program Changes, Continuous…
Remote Loading of Patches and Multis
Performing Live with Omnisphere » Remote Loading of Patches and Multis
Loading sounds remotely can be very handy in live situations and with Omnisphere, you can do this using any MIDI controller. Since Omnisphere’s Browser is MIDI-Learnable, you can have as many Patches or Multis available to you at a gig as you need. NOTE:…
Using Omni TR
Performing Live with Omnisphere » Using Omni TR
OMNI TR turns an iPad into a performance-oriented, remote control surface for Omnisphere. It is particularly useful when using Multis in LIVE MODE since with OMNI TR you can remotely select which parts to play using the iPad multi-touch screen—an excellent way to…
MIDI Learn and Automation
Concepts » MIDI Learn and Automation
Understanding Parameter Control There are three ways to control parameters in Omnisphere: Modulation, MIDI Learn, and Automation. Deciding which type of Parameter Control to use depends on a number of factors including which host you use, which parameters you…
Save as Default Multi
Concepts » The Header » Utility Menu » Save as Default Multi
Saving a Multi preserves the entire state of the plug-in for future recall. A Multi stores all of the settings from the MIXER page, the Multi FX, the LIVE MODE and STACK MODE pages, all MIDI Learn & Automation assignments, as well as all of the settings (including…
Navigation Buttons
Concepts » The Header » Navigation Buttons
The Navigation Buttons in the header are used to select and view any of the eight Parts, the Multi Section, or the System Page. Only one button can be selected at a time. Part Select Buttons (1 ~ 8) Buttons 1–8 are Part Select Buttons. Selecting a Part lets…
QuickStart
Getting Started » QuickStart
This QuickStart provides an overview of the essential things you’ill need to know in order to get started using Omnisphere. Omnisphere is a powerful software instrument and can be run as a standalone application or hosted in any software DAW. Omnisphere…
Utility Menu
Concepts » The Header » Utility Menu
The Utility Menu is located in the upper left-hand corner of the Header and gives you access to some of Omnisphere’s fundamental functionality. This menu contains a MIDI Learn and Automation sub-menu as well as Undo/Redo commands. Here, you can Save, Clear,…
Aux Sends
The Mixer » Aux Sends
Each of the four Aux Sends has its own FX Rack (accessed by selecting the FX Button at the top of the MIXER). The AUX1–AUX4 knobs let you control the amount of FX applied to the Part. NOTE: The Aux Sends FX are shared by all 8 Parts in the MULTI. Please see the…
Multis
Concepts » Architecture and Hierarchy » Multis
A Multi is comprised of all eight Parts, four Aux FX Racks, a Master FX Rack and a Master Mixer. It also includes any Live Mode and Stack Mode settings, and all MIDI Learn assignments. Therefore, saving a Multi is saving the entire state of the instrument for…
Using Multis
Performing Live with Omnisphere » Using Multis
If your live gig is relatively straightforward and you don’t need to change Patches frequently, loading one Patch at a time remotely is often the simplest way to go. However, if you anticipate needing more sounds or you just want to have options to switch…
The Header
Concepts » The Header
The top area of the Omnisphere interface is the Header. The Header is visible from any page in Omnisphere (except when any Full Browser is open) and is the primary navigation area of the interface. The Header contains the Utility Menu, Multi Information, (including…
Using Satellite Instruments
Concepts » Satellite Integration » Using Satellite Instruments
Keyscape’s keyboards and Trilian’s basses come equipped with controls that permit you to modify them in many creative ways . For those who want to delve even deeper, users can open any of the sounds from the Keyscape and Trilian libraries inside our flagship…
Selecting Parts
Live Mode » Selecting Parts
To get the most out of LIVE MODE, it can often be more convenient to switch Parts by other means than the mouse — via Windows Multitouch, by MIDI-Learning the Part switches, or by using Omni TR our remote control app for the iPad . To MIDI-Learn a Part,…
Full Browser Overview
The Browsers » Full Browser Overview
NOTE: When using Satellite Instruments inside Omnisphere, its Soundsources, Patches, and Multis will also display unique images which identify the instrument or feel of the selected sound. When you open a Keyscape or Trilian Patch in Omnisphere, the Custom…
Sample Mode / Soundsources
Concepts » Architecture and Hierarchy » Oscillators » Sample Mode / Soundsources
Soundsources allow Omnisphere’s signal path to begin with sampled sounds instead of DSP waveforms. Soundsources are based on a ‘map’ of audio samples stored in the Core Library of Omnisphere in Spectrasonics’ proprietary STEAM format. A Soundsource can be…
Folder Icon Buttons
Concepts » Interface Conventions » Folder Icon Buttons
Besides the Mini-Browser, there are three Full Browsers built into Omnisphere, one each for Multis, Patches, and Soundsources. All three Full Browsers have identical functions, but access different parts of the Core Library. Anywhere that you see a Folder icon,…
Sonic Extensions
Sonic Extensions
Sonic Extensions is a completely new experience for Omnisphere — an innovative brand of products built by Spectrasonics. Available as an optional purchase, each Sonic Extension focuses on a specific aesthetic with a unique interface, a vast array of stunning,…
STEAM Engine
Concepts » STEAM Engine
The STEAM Engine® is the core technology created by the Spectrasonics in-house development team, and is used as the basis of all Spectrasonics performance instruments, including Omnisphere, Keyscape, and Trilian. Like our core S.A.G.E. technology, used for…
Performing Live with Omnisphere
Performing Live with Omnisphere
Bringing Omnisphere to the gig lets you bring your favorite studio sounds into the live performance arena. With today’s fast laptops and by using either our standalone application or instantiating Omnisphere as a plug-in inside your DAW of choice, you’ll…
Sonic Extensions
Concepts » Sonic Extensions
Sonic Extensions is a completely new experience for Omnisphere — an innovative brand of products built by Spectrasonics. Available as an optional purchase, each Sonic Extension focuses on a specific aesthetic with a unique interface, a vast array of stunning,…
Jumbo
Concepts » Omni TR » Jumbo
Omni TR’s Jumbo page is a two-way, touchscreen remote control for Live Mode. The Patch selection buttons on the Jumbo page are large and easy-to-read, making it ideal for stage use. Since Omnisphere’s Live Mode already allows multiple sound selection, the…
Custom Controls
Sonic Extensions » Custom Controls
Two of the main advantages of Sonic Extensions Patches are Custom Controls and Scenes. Custom Controls Exclusive to Sonic Extensions, Custom Controls allow for quick sound customization from a single page. Each Sonic Extensions Patch has a unique layout that…
Satellite Integration
Concepts » Satellite Integration
Omnisphere 2 can fully integrate Trilian and Keyscape as Satellite instruments within the Omnisphere® interface. Not only is it a significant expansion of new Patches and Soundsources, this capability allows Omnisphere 2 users to harness and apply the full…
Parameter Values
Concepts » Interface Conventions » Parameter Values
Adjusting Knobs and Sliders will display their current setting or value in a floating display above the controls. Holding down the SHIFT key while adjusting Knobs and Sliders allows for more precise adjustments. Enter Parameter Value Precise settings can be…
Knobs and Sliders
Concepts » Interface Conventions » Knobs and Sliders
Using a mouse, Knobs and Sliders (vertical and horizontal) are adjusted by clicking and dragging. Most Knobs and Sliders in Omnisphere can be MIDI-Learned for direct control from a MIDI device. Knobs NOTE: Knobs are controlled by vertical (up and down) or…
Switches
Concepts » Interface Conventions » Switches
Switches let you toggle certain parameters ON/OFF or switch between multiple options. When a parameter is enabled or selected, the switch will be highlighted. For example on the Layer Pages, switches toggle between SAMPLE Mode and SYNTH Mode, toggle LFO Sync ON/OFF, or…
Drop-Down Menus
Concepts » Interface Conventions » Drop-Down Menus
A downward facing arrow indicates that a drop-down menu is available. There are numerous drop-down menus in the Omnisphere interface, which provide access to settings, Presets, MIDI Learn, Automation, and other functions.
Reset Defaults and Preferences
Concepts » The Header » Utility Menu » Reset Defaults and Preferences
The Utility Menu lets you perform a “factory reset” by selecting “Reset Defaults and Preferences.” After selecting this option, a message will be displayed, warning you that this action will overwrite your default Multi and User Preferences. A…
Buttons
Concepts » Interface Conventions » Buttons
Buttons are used for choosing sections or selecting from among multiples of a single type. When selected, buttons will be highlighted in blue. For example, there are 8 LFO buttons. When one of them is highlighted it means it is selected, and that LFO’s settings are…
Browsing Sounds
Concepts » Satellite Integration » Browsing Sounds
While Trilian’s browser operates in the same manner as the browser in Omnisphere, Keyscape’s Patch organization is slightly different. When opening Keyscape sounds in Omnisphere, the sounds are presented in a manner that conforms to Omnisphere’s Patch…
Mixer Controls
Live Mode » Mixer Controls
Displays the basic Mixer Controls for each of the eight Parts, and includes a Mute button, Solo button, a Level slider, and a Folder icon to access the Patch Browser. Any changes made using the Mixer Controls on the LIVE MODE page will be reflected on the MIXER…
Hardware Profiles Menu
Concepts » The Header » Hardware Profiles Menu
Clicking on the HW Menu button to the left of the Multi Name Display reveals the Hardware Profiles Menu. From here, you may select or deactivate any of the Hardware Profiles, as well as Save User Tweaks and Restore Factory Defaults, save your changes to the…
Loading Satellite Sounds
The Browsers » Loading Satellite Sounds
One of the powerful features of Omnisphere is Library Integration. If you also have Keyscape and/or Trilian installed, the libraries for those satellite instruments will appear in the Browser DIRECTORY menu along with your other Omnisphere libraries. The…
MIDI Learn
Concepts » The Header » MIDI Learn
The Utility Menu provides the MIDI Learn and Automation options that apply to the entire plug-in. These include MIDI Learn Templates, Unlearn All, and access to a ‘Current Assignments’ Report. See the MIDI Learn & Automation section for…
Live / Stack Mode Indicators
Concepts » The Header » Live / Stack Mode Indicators
When either LIVE MODE or STACK MODE is enabled, you’ll see the respective label displayed on the left side of the Omnisphere header.
Using Live Mode and Stack Mode
Performing Live with Omnisphere » Using Live Mode and Stack Mode
Live Mode LIVE MODE is a powerful feature designed for a multi-Part performance in a live environment. It allows you to instantly and seamlessly switch and layer pre-loaded Parts on-the-fly. Live Mode also gives you large graphics for enhanced interface visibility in…
System
System
The System Page is a universal control area that governs how Omnisphere’s sounds are streamed, sets certain user defaults, master tuning, and configurations for the modulation controls. The System page is divided into five sections: Memory…
Magnify Window
Concepts » The Header » Utility Menu » Magnify Window
Omnisphere’s interface can be enlarged to accommodate different screen resolutions. Choose your preferred size in the Utility Menu / Magnify Window sub-menu: Magnify Window 0.8x – Scaled down to 80% Magnify Window 0.9x – Scaled down to…
Zoom Icon Buttons
Concepts » Interface Conventions » Zoom Icon Buttons
One of the features of Omnisphere’s interface design is that it only reveals its depth and complexity on an as-needed basis. The Zoom Icon Buttons provide access to Zoom Views, where you can view expanded information or interact with Omnisphere’s more…
Architecture and Hierarchy
Concepts » Architecture and Hierarchy
Omnisphere is a uniquely powerful synthesizer that takes well-known elements of synthesis a step further to provide inspiration for any level of musician, producer, composer, or sound designer. Omnisphere can quickly provide production-ready sounds with its factory…
Performance Optimzation
Concepts » Performance Optimzation
The vast majority of Omnisphere Patches will play comfortably within your host, without over-stressing the computer’s CPU or memory. However some Patches employ sophisticated effects or large numbers of streamed samples, and those may require special attention.…
Miscellaneous
System » Miscellaneous
This area provides global options for the instrument’s Startup Page, Round Robin settings, and preferences for how the Layers behave in the interface. Startup Page Preference Omnisphere’s default startup page is the Main Page. This menu allows you to select…
Parameter and Browser Scrolling
Concepts » Interface Conventions » Parameter and Browser Scrolling
Omnisphere lets you adjust parameters by scrolling with your mouse, trackball, trackpad, or Windows MultiTouch when the cursor hovers over any scroll bar, knob, slider, menu, or browser.
Master Volume Control
Concepts » The Header » Master Volume Control
The Master Volume slider controls the output of the entire plug-in and includes a meter, providing a reference to the output signal. Range -inf dB to 9.54 dB
Indicator Switches
Concepts » Interface Conventions » Indicator Switches
The Indicator Switch LEDs found below the Page buttons can be both status indicators and toggles. The blue LEDs below ORB, A, B, C, D, and ARP indicate whether the feature is enabled or not, and double as a toggle to enable/disable them. The LED below MAIN…
Scenes
Sonic Extensions » Scenes
Scenes are a unique feature found only in Sonic Extensions — they are part of every Custom Control layout. A Scene is a snapshot of the Custom Controls and therefore a unique sound in itself. Every Sonic Extensions Patch has five factory Scenes. Depending on the…
Up/Down Steppers
Concepts » Interface Conventions » Up/Down Steppers
Steppers (up/down arrows) are located throughout the Omnisphere interface, and are used to step through values or load saved settings, incrementing or decrementing one at a time. In the picture above, clicking the arrows will step through the different LFO…
Patch Name
The Mixer » Patch Name
The Patch Name Display shows the currently loaded Patch. Clicking the Patch Name Display will open the Patch Browser. Patches can then be browsed and loaded for that Part. Closing the Patch Browser will return you to the MIXER page. *Please refer to the BROWSER…
Contextual Menus
Concepts » Interface Conventions » Contextual Menus
Contextual Menus are an important part of the Omnisphere interface, and provide convenient access to many important functions. Right/Control-clicking almost anywhere in the Omnisphere interface will bring up a contextual menu. The contents of the menu will depend…
Browsing Sounds
Sonic Extensions » Browsing Sounds
Browsing and selecting Sonic Extensions sounds works in the same way it does in Omnisphere. Select a Sonic Extension from the Sonic Extensions Directory. Patches are available for browsing on the left in the Mini-Browser, where you can select them with your…
Install .omnisphere
Concepts » The Header » Utility Menu » Install .omnisphere
Adding sounds to your library that have been Shared by other Omnisphere users is simple! Omnisphere sounds that have been shared using the Sharing feature are conveniently collected into a single .omnisphere file, which can be added to your library in a single…
Sonic Extensions FX
The FX Page » Sonic Extensions FX
Each Sonic Extension includes two ultra high-quality custom FX units designed and created by Spectrasonics specifically for that Extension. However, Sonic Extension FX are not limited to the Sonic Extension for which they were built. They can be applied to ANY…
Sonic Extension Effects
Sonic Extensions » Sonic Extension Effects
Each Sonic Extension includes two ultra high-quality custom FX units designed and created by Spectrasonics specifically for that Extension. However, Sonic Extension FX are not limited to the Sonic Extension for which they were built. They can be applied to ANY…
Multi Display
Concepts » The Header » Multi Display
This part of the Header contains the Multi Name Display, Multi Steppers, and a Folder icon for access to the Multi Browser. Selecting the Folder icon, or anywhere inside the Multi Name Display, will open the Multi Browser. After a MULTI has been loaded, the name of…
The Mixer
The Mixer
The MIXER page provides a complete overview of all the Parts in a MULTI. All eight Parts are displayed in a traditional eight-channel mixer layout, with each Part having the following adjustable settings: MIDI Channel Output Channel MUTE and SOLO Patch Name…
Part Number and MIDI Channel
The Mixer » Part Number and MIDI Channel
Part Number Each of Omnisphere’s eight Parts is numbered along the far left of the MIXER page. MIDI Channel By default, Parts 1–8 are assigned sequentially to MIDI Channels 1 ~ 8. However, each Part in a MULTI can be set to respond to any one of 16 MIDI…
Mixer and Jumbo Views
Live Mode » Mixer and Jumbo Views
When Mixer View is selected, this area displays the basic mixer controls for each of the eight Parts. In addition to Level, Mute, and Solo, there is a Folder icon to access the Patch Browser, Latch and Trigger selectors, the Settings Zoom icon, and the Stop All…
Layers
Concepts » Architecture and Hierarchy » Layers
Omnisphere’s Layer pages are where the majority of sound design and editing decisions are made. Each Layer has an independent set of synthesis controls that will only affect the individual Layer. These include oscillator selection, a dual-filter section,…
Synth Mode / DSP
Concepts » Architecture and Hierarchy » Oscillators » Synth Mode / DSP
Synth Mode employs your computer’s processor through the use of DSP (Digital Signal Processing) to synthesize wavetables in real-time. A wavetable is a collection of single-cycle waveforms that can be swept through smoothly (using the Shape slider), creating…
Modifier Keys
Concepts » Interface Conventions » Modifier Keys
There are a number of Omnisphere functions that are modified by combining a mouse-click (or click and drag) with one of three Key Modifiers: the Command/Control key, Shift key, or the Option/Alt key. In the manual these are referred to as: Control-Click (Mac…
Mute and Solo
The Mixer » Mute and Solo
Mute Selecting the M Button mutes the audio output for that Part. However, the Part is still playing in the background when muted, and will continue to use CPU resources. Solo Selecting the S Button will Solo a Part. When the Solo button is selected, only that…
Save User Tweaks
Hardware Synth Integration » Save User Tweaks
When you load a HW profile, Omnisphere is instantly set up to perform a large number of sophisticated actions with the touch of a knob. You might be using your hardware synth to instantiate Omnisphere effects, create modulation routings, control multiple scaled…
Patch Browser
The Browsers » Full Browser Overview » Patch Browser
The Full Patch Browser is accessed from the Patch Name Display, which is always visible and available from any of the Part pages. Select the Folder Icon Button or click on the Patch Name Display to open the Full Patch Browser. Full Patch Browser The Patch…
Latch and Trigger Modes
Concepts » Omni TR » Main » Latch and Trigger Modes
The LATCH and TRIGGER Modes extend the multi-timbral performance capabilities of Omnisphere, especially when used together with Live Mode or Stack Mode. They enable real-time creation of complex, multi-Part performances which synchronize with other Parts and clocked…
Parts and Patches
Concepts » Architecture and Hierarchy » Parts and Patches
In Omnisphere, a Part can be thought of as an entire synthesizer, complete a multitude of parameters: oscillators, modulation routings, FX etc. A Patch is a snapshot of settings for those parameters and is loaded into a Part. A Patch is the most commonly used type…
Installation
Getting Started » Installation
Omnisphere can be installed from a USB drive or direct download. The following pages have instructions for performing default and custom installations for both Mac and Windows. Please refer to the Authorization section of this guide for further…
SE Installation
Sonic Extensions » SE Installation
Sonic Extensions are downloadable products available at www.sonicextensions.com for registered Omnisphere 2 users. The following pages contain instructions for installing your Sonic Extension(s) for both macOS and Windows. Refer to the Authorization to make sure…
Loading Sounds
The Browsers » Operation » Loading Sounds
Selecting a sound in the Browser also loads it. How quickly it loads depends on the amount of samples the sound has and how they are mapped, and whether Progressive Loading or Lite Version are enabled. Progressive Loading Omnisphere’s Progressive Loading…
Link Omnisphere GUI
Hardware Synth Integration » Link Omnisphere GUI
When a Hardware Profile is loaded, Omnisphere follows your moves on the hardware synth by automatically switching to the relevant page. If you adjust the envelope on the hardware synth, Omnisphere will display that envelope’s zoom page. If you adjust an…
Oscillators
Concepts » Architecture and Hierarchy » Oscillators
An oscillator can be thought of as the smallest building block of a sound and the best place to start when creating a new Patch from scratch in Omnisphere. The signal path of Omnisphere starts with its oscillators, so oscillator settings will affect all of the…
Browser Footer
The Browsers » Full Browser Overview » Browser Footer
The Browser Footer provides access to the Tag Editor and Browser Settings, access to the Lite Version Options, a menu with multiple sorting options, a Shuffle button, Up/Down steppers, Refresh and Audition buttons, and access to the Info View, which shows more…
Reference Guide
Concepts » The Header » Utility Menu » Reference Guide
Selecting this option from the Utility Menu will open the online Omnisphere Reference Guide. The Reference Guide will be displayed using your default Web Browser. If you’d like to hide the Table of Contents sidebar in order to display any of the images in a…
MIDI Channel Menu
Stack Mode » MIDI Channel Menu
All of the Parts in STACK MODE respond to a single MIDI Channel, even if the Parts are assigned to different MIDI Channels on the MIXER page. Use the MIDI Channel Menu to select STACK MODE’s MIDI Channel. Range Any, CH: 1 – CH: 16.
Host Automation
Concepts » MIDI Learn and Automation » Host Automation
All MIDI-Learnable parameters in Omnisphere can also be automated using the Host Automation feature. Each host handles Host Automation differently, so it’s important to understand how your specific software will interact with Omnisphere. Enabling Host Automation…
Projects
The Browsers » Projects
Projects are an excellent way to manage and organize your sounds, making it easier to work efficiently within Omnisphere’s enormous library. Saving your sounds into Projects lets you collect and organize sounds together with a particular job or session and…
Authorization Troubleshooting
Getting Started » Authorization » Authorization Troubleshooting
If you are returned to the Welcome to the Omnisphere Authorization System after reopening the instrument, that means the plug-in did not accept the Response Code and it may have been incorrectly entered. Try authorizing again with the instructions given in the…
Browser Header
The Browsers » Full Browser Overview » Browser Header
The Full Patch Browser Header contains the Browser Title, the Part selector drop-down menu, a Memory Meter, controls that let you apply filtering options using the Directory Menu, buttons that allow selection of the three browsing modes (Attributes, File…
Soundsource Browser
The Browsers » Full Browser Overview » Soundsource Browser
The Soundsource Browser is accessed from the Layer pages, as well as the Main Page. On the Layer pages, select the SAMPLE tab in the OSCILLATOR section, then click on the image or the folder icon in the display to open the Soundsource Browser. On the Main…
Omni TR
Concepts » Omni TR
The Omni TR (Touch Remote) iPad app uses the tactile advantages of the iPad as a performance-oriented touch surface—creating a true hands-on experience for musicians. One of the big differences between software and hardware synths is the hands-on aspect-the…
Arpeggiator
Arpeggiator
An arpeggiator receives incoming MIDI notes, and outputs a sequenced pattern of notes based on a defined set of rules. Although similar in concept to a step sequencer, an arpeggiator has a number of differences that set it apart. Like a step sequencer, an…
Settings Zoom
Live Mode » Settings Zoom
The SETTINGS page allows the configuration of LIVE MODE parameters. These include the Part selection methods LIVE MODE responds to, as well as settings for MIDI Channel, Modes, and Display Formats. Settings in DUAL LIVE MODE When Dual Live Mode is enabled, the…
Windows: Bonjour Installation
Concepts » Omni TR » Omni TR – Getting Started » Windows: Bonjour Installation
Windows users must install Bonjour to use Omni TR Please visit the Apple download site. Search for “Bonjour Print Services for Windows” and download the installer. Run the BonjourPSSetup.exe and follow the steps to complete the…
The Browsers
The Browsers
Omnisphere ships with a large library of sounds, so it requires sophisticated search, filtering and browsing capabilities. The Browsers in Omnisphere were designed to provide an intuitive and convenient way to quickly find exactly what you need from a library…
Sharing Sounds
Sharing » Sharing Sounds
When you want to share only one type of sound at a time, (Multis, Patches, or User Soundsources), this is the quickest and simplest method. NOTE: You can share User Soundsources by themselves, without Patches or Multis, but if a Patch or Multi you are sharing employs…
Display Menu
Stack Mode » Display Menu
The Display Menu allows you to choose which information is displayed with each Region in the STACK MODE Grid. Show Name Displays only the Part Name. Show Part # Displays only the Part Number. This corresponds to the Part Number on the MIXER Page. …
Using Hardware Synth Integration Live
Performing Live with Omnisphere » Using Hardware Synth Integration Live
One of the great things about using a hardware synth on a live gig is that you can reach for a knob and tweak the sounds in real time. If your live setup includes one of the hardware synths we support, you can use it to control Omnisphere by using Hardware Synth…
MIDI Learn Menus
Concepts » MIDI Learn and Automation » MIDI Learn Menus
The MIDI Learn Menu provides MIDI Learn options that affect the entire plug-in. It is accessed via the Utility Menu or by Right/Control-clicking any empty area of the Omnisphere interface. MIDI Learn Template All MIDI Learn and Automation assignments are saved…
Authorization Troubleshooting
Sonic Extensions » SE Authorization » Authorization Troubleshooting
If you select one of the Sonic Extensions Patches or FX units and see the following Notice, it means that Omnisphere hasn’t yet ben authorized to use it. Follow the steps detailed here on how to authorize your Sonic Extension(s) in Omnisphere. If you are…
Re-ordering Parts
Live Mode » Re-ordering Parts
Parts can be re-ordered by dragging and dropping them between the eight Slots. Dropping a Part into an occupied Slot doesn’t delete the existing Part. Instead, all the remaining Parts will move to make room for the dropped Part. NOTE: Re-ordering Parts in the…
Notes Mode
Stack Mode » Operation Modes » Notes Mode
When NOTES Mode is selected, Part Regions are mapped to a MIDI note range, allowing you to map splits, layers, and positional crossfades across the keyboard. Each of the 128 lines in the grid correspond to a MIDI Note number, and Regions can be mapped over a…
Omni TR Troubleshooting
Concepts » Omni TR » Omni TR – Getting Started » Omni TR Troubleshooting
If you press the “Connect” button and don’t see your computer in the list, please take the following steps: Check to make sure you have Omnisphere version 1.5 or newer installed on your computer. Check to make sure “Accept Omni TR…
Clear, Save, Copy, and Paste
Concepts » The Header » Utility Menu » Clear, Save, Copy, and Paste
The Utility Menu provides options to Initialize or Clear Multis, Patches and Layers, and to Save Multis and Patches. There are also functions that allow Part and Layer settings to be copied and pasted. Initialize vs. Clear (Multi, Patch, and Layer) When you…
Notes View
The Main Page » Notes View
The MAIN NOTES view provides a visual representation of the Patch, along with useful information and performance suggestions. Click on the magnifying glass to access the Patch Zoom, for a more detailed description of the Patch, creative ideas for its…
MIDI Controller
System » Modulation » MIDI Controller
The choices for MIDI Modulation Sources in Omnisphere include a variety of standard MIDI controllers such as Wheel, Legato, Expression, etc. You can use these options on the SYSTEM Page to map those sources to other MIDI controls. For example, if you don’t have a…
Main
Concepts » Omni TR » Main
The Main Page mirrors Omnisphere’s unique Live Mode, offering eight Patch slots with Latch and Trigger modes, individual Mute and Solo, and Multi-Function Sliders. On this page alone, Omnisphere becomes a new performance instrument with the iPad sitting at the…
User Audio
Concepts » The Header » Utility Menu » User Audio
Omnisphere allows you to import your own audio to use as Soundsources and to create your own Patches and Multis. You can process and manipulate your own audio in creative ways using Omnisphere’s powerful synthesis capabilities. Each imported audio file will…
Automation
Concepts » Omni TR » The Orb » Automation
The ORB’s movements can be automated in your host sequencer by enabling Host Automation in Omnisphere’s ORB page. Since the ORB’s movements are plotted on two planes, Angle and Radius, they must be enabled independently. To enable the ORB’s…