Wah-Wah

The WAH-WAH FX unit was modeled after classic wah-wah pedals of the 1970s. It’s a fun and versatile effect that doesn’t sound like any of the other Omnisphere Filters. This FX unit works both as a sweeping wah-wah and also as an “auto-wah” envelope filter effect by using the controls on Page 2.

PAGE ONE CONTROLS

• [SWEEP LFO] RATE
  Controls the speed of the LFO’s Sweeps.
  When Synced: 16x, 8x, 7x, 6x, 5x, 4x, 3x, 2x, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/2D, 1/4D, 1/8D, 1/16D, 1/2T, 1/4T, 1/8T, 1/16T
  Unsynced: 0 ~ 8.8 Hz

• [SWEEP LFO] DEPTH
  Controls the sweep range of the LFO.
  Range: OFF ~ 100%

• [SWEEP LFO] SYNC
  Engages and disengages synchronization of the LFO rate with the host’s tempo.

• [TONE] FREQ
  Controls the Center Frequency range of the filter wah.
  Range: -10 ~ +10%

• [TONE] Q
  Controls the Resonance or emphasis of the wah frequency.
  Range: -10 ~ +10%

• [TONE] WIDE
  A phase reversal that inverts the left and right modulation for a stereo wah effect.

PAGE TWO CONTROLS

• [AUTO ENV] THRESHOLD
  The audio level at which the Envelope Follower modulation begins.
  Range 0 ~ -90 dB

• [AUTO ENV] ATTACK
  The time of the Envelope Follower modulation beginning slope.
  Range 200 ~ 8000 ms

• [AUTO ENV] RELEASE
  The time of the Envelope Follower modulation ending slope.
  Range 25 ~ 1500 ms

• [AUTO ENV] POLARITY
  The polarity of the Envelope Follower modulation.
  Choices: HIGH/LOW, LOW/HIGH

• SOURCE
  Drop-down menu that allows a choice between LFO and AUTO-ENV as the source of the wah-wah modulation.

• LEVEL
  Adjusts the overall output.
  Range: 0 ~ 13 dB