Retro Flanger

Flanging is a sweeping, comb-filter type effect. The Retro Flanger has special features that give the sound a more lo-fi, vintage character.

MINI-SLIDER
Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet.
Range: 0 ~ 1

PAGE ONE CONTROLS

• RATE
  Controls the speed of the Flanger’s cycles. This is the Retro-Flanger’s LFO rate control.
  Range:
  Synced: 32x,16x, 8x, 7x, 6x, 5x, 4x, 3x, 2x, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/96, 1/1dot, 1/2dot, 1/4dot, 1/8dot, 1/16dot, 1/1triplet, 1/2triplet, 1/4triplet, 1/8triplet, 1/16triplet
  Unsynced: 0.00Hz ~ 15.000Hz

• DEPTH
  Controls the width of the LFO’s sweep range.
  Range: 0.01 ~ 1

• SYNC
  Engages and Disengages synchronization of the LFO rate with the host’s tempo.

• DELAY
  Controls the center frequency/delay time of the flanger.
  Range: 0.005 ~ 0.1 ms

• FEEDBACK
  Controls the amount of delay feedback, which produces a stronger flanging resonance.
  Range: 0.01 ~ 0.99

• INVERT
  Reverses the phase of the delay feedback signal, producing a throatier flanging tone.

• LEVEL
  Adjusts the overall output volume.
  Range: -inf ~ 0 Unity gain

PAGE TWO CONTROLS

• DIRT
  Adds overdrive to the Retro Flanger’s signal.

• TONE
  This control is a simple tone filter control that adjusts the brightness of the signal.
  Range: Dark ~ Bright

• TONE FX
  Applies the Tone setting to both the wet and dry signals, or just the wet signal.
  Range: WET / DRY or WET

• WIDTH
  Controls the width of the stereo image of the Retro-Flanger signal.
  Range: 0 ~ 100%