Offsets

CUTOFF OFFSET

Filter Cutoff settings affect both FILTER 1 and FILTER 2. The CUTOFF OFFSET counterbalances the Cutoff for FILTER 1 and FILTER 2 independently. These are not separate filters controls—they simply increase or decrease the Cutoff frequency for each Filter, relative to the primary Cutoff control.

When the slider is centered, there is no offset to the Filter Cutoff. Moving the slider to the right increases the offset and moving it to the left decreases it.

RESONANCE OFFSET

Filter Resonance settings affect both FILTER 1 and FILTER 2. The RES OFFSET allows the FILTER 1 and FILTER 2 resonance depth to be set independently, by decreasing or increasing the resonance setting for each Filter, relative to the primary Resonance control.

When the slider is centered, there is no offset to the Filter Resonance. Moving the slider to the right increases the offset and moving it to the left decreases it.

VARIANT OFFSET

VARIANT settings affect both FILTER 1 and FILTER 2. The VARIANT OFFSET allows the FILTER 1 and FILTER 2 Variants to be set independently, by decreasing or increasing the VARIANT setting for each Filter relative to the primary VARIANT control.

When the slider is centered, there is no offset to the VARIANT. Moving the slider to the right increases the offset and moving it to the left decreases it.