Search
Related topics are listed below.
Sharing
Sharing
Using the Sharing feature, it’s easy for you to share your custom Omnisphere sounds, no matter if they were created using Factory Soundsources, Wavetables, or your own audio. You can share any combination of Patches, Multis, and User Soundsources with a few…
Sharing Sounds
Sharing » Sharing Sounds
When you want to share only one type of sound at a time, (Multis, Patches, or User Soundsources), this is the quickest and simplest method. NOTE: You can share User Soundsources by themselves, without Patches or Multis, but if a Patch or Multi you are sharing employs…
Sharing Projects
Sharing » Sharing Projects
Sharing Projects lets you assign sounds to a specific Project and share them with other users. This method uses the Project features located in the Full Browsers. You can share any combination of Patches, Multis, and User Soundsources with a few simple steps. All the…
The Browsers
The Browsers
Omnisphere ships with a large library of sounds, so it requires sophisticated search, filtering and browsing capabilities. The Browsers in Omnisphere were designed to provide an intuitive and convenient way to quickly find exactly what you need from a library…
Depth
The Layer Pages » LFOs » Depth
The LFO DEPTH knob controls the intensity of the LFO’s effect on the Mod Target. The higher the setting, the greater the amount of the LFO signal is sent to the Mod Matrix.
Depth
The Layer Pages » Envelopes » Envelope Zoom » Depth
The DEPTH slider controls the amount of Envelope Modulation that is sent to the Mod Matrix and is a duplicate of the DEPTH control found in the MOD Envelope sections. At minimum settings, little to no modulation will be sent to the Modulation Target. At the maximum…
Multi Display
Concepts » The Header » Multi Display
This part of the Header contains the Multi Name Display, Multi Steppers, and a Folder icon for access to the Multi Browser. Selecting the Folder icon, or anywhere inside the Multi Name Display, will open the Multi Browser. After a MULTI has been loaded, the name of…
Browsing Patches and Multis
Concepts » Omni TR » Browsing Patches and Multis
Omni TR gives you the convenience of browsing Omnisphere Patches and Multis remotely from your iPad. Browsing Multis You can browse Multis from every page in Omni TR. Touch the folder icon to the left of the “Browse Multis” display to reveal a list…
Resonance
The Layer Pages » Filters » Resonance
Resonance is also called ‘Q’ or Emphasis in synthesizers, because it emphasizes the cutoff point of the filter. Resonance can often increase the loudness of the Filter, so its a good idea to use this control along with the Filter Gain, so that audio clipping…
The Header
Concepts » The Header
The top area of the Omnisphere interface is the Header. The Header is visible from any page in Omnisphere (except when any Full Browser is open) and is the primary navigation area of the interface. The Header contains the Utility Menu, Multi Information, (including…
Modulation
System » Modulation
The MODULATION assignments section allows you to override and remap the standard MIDI messages used by the Modulation Matrix sources in Omnisphere. Simply select the drop-down menu next to one of the 14 modulation types and a pop-up will appear that says “Move…
Dynamics
The FX Page » Dynamics
Omnisphere includes seven dynamics processors, modeled on the finest studio hardware from the past 6 decades. These units provide precise dynamic control, as well as a variety of sonic colors. Tube Limiter Tape Slammer Modern…
Rate
The Layer Pages » LFOs » Rate
The RATE knob controls the speed of the LFO’s cycle and has two modes. These modes depend on the state of the LFO SYNC button. SYNC OFF – The LFO’s rate is not synchronized with the host tempo and the LFO’s rate is measured in Hz. The rate increases as…
Amplifiers
The FX Page » Amplifiers
Omnisphere includes nine amplifier models for unique sonic coloration. From clean, bell-like tones and fat, classic tube distortion, to sounds you can only get from the cheesiest transistor radio…
The Main Page
The Main Page
The Main Page can be considered Omnisphere’s “dashboard.” It allows quick changes to the Patch that has been loaded and there are useful performance controls that appear here exclusively. The parameter controls in the MAIN page affect the…
Mixer and Jumbo Views
Live Mode » Mixer and Jumbo Views
When Mixer View is selected, this area displays the basic mixer controls for each of the eight Parts. In addition to Level, Mute, and Solo, there is a Folder icon to access the Patch Browser, Latch and Trigger selectors, the Settings Zoom icon, and the Stop All…
Sound Lock
The Browsers » Sound Lock
Sound Lock lets you lock specific parameters of a Patch and apply them to other Patches as you browse. You can use the FX section of a Patch, the Arpeggiator pattern of another one and the Modulation Matrix of a third one. This mix-and-match approach makes…
Adding Sounds
Sharing » Adding Sounds
Adding sounds to your library that have been Shared by other Omnisphere users is simple! Omnisphere sounds that have been shared using the Sharing feature are conveniently collected into a single .omnisphere file. Files with the extension .omnipshere can be added to…
Publishing a Library
Sharing » Publishing a Library
The Publish Library feature was created for third-party developers of Omnisphere Libraries. It allows developers to easily export or “publish” a library of tagged and categorized Multis, Patches, any associated Soundsources, and custom images in a single…
Share Sounds
Concepts » The Header » Utility Menu » Share Sounds
Using the Sharing feature, it’s easy for you to share your custom Omnisphere sounds, no matter if they were created using Factory Soundsources, Wavetables, or your own audio. You can share any combination of Patches, Multis, and User Soundsources with a few…
Marking Sounds
The Browsers » Operation » Marking Sounds
Sounds can be marked with two purposes: for sharing them and for adding them to Projects. To mark a sound, shift+click on it in the Browser. The sound will be with highlighted with a pale blue bar and a dot. To unmark a sound, shift+click on it again. To…
Loading Third-Party Libraries
The Browsers » Loading Third-Party Libraries
The most convenient method for sharing and/or adding third-party sounds is through the use of .omnisphere files (see Sharing), which contain all Patches and Soundsources being shared, as well as additional organization and information by the developer. If your…
Install .omnisphere
Concepts » The Header » Utility Menu » Install .omnisphere
Adding sounds to your library that have been Shared by other Omnisphere users is simple! Omnisphere sounds that have been shared using the Sharing feature are conveniently collected into a single .omnisphere file, which can be added to your library in a single…
Projects
The Browsers » Projects
Projects are an excellent way to manage and organize your sounds, making it easier to work efficiently within Omnisphere’s enormous library. Saving your sounds into Projects lets you collect and organize sounds together with a particular job or session and…
Browser Header
The Browsers » Full Browser Overview » Browser Header
The Full Patch Browser Header contains the Browser Title, the Part selector drop-down menu, a Memory Meter, controls that let you apply filtering options using the Directory Menu, buttons that allow selection of the three browsing modes (Attributes, File…
Patches
Sharing » Adding Images to a Library » Patches
Images can be shared by an entire library of Patches, by a Category, or used by a single Patch. Adding Images to a Patch Library An image can be shared by all the Patches in a Library. You will need two .jpg files with the following naming convention and…
Multis
Sharing » Adding Images to a Library » Multis
A set of images can be shared by an entire library of Multis, by a Category, or used by a single Multi. Adding Images to a Multi Library A set of images can be shared by all the Multis in a library. You will need two .jpg files with the following naming convention…
Utility Menu
Concepts » The Header » Utility Menu
The Utility Menu is located in the upper left-hand corner of the Header and gives you access to some of Omnisphere’s fundamental functionality. This menu contains a MIDI Learn and Automation sub-menu as well as Undo/Redo commands. Here, you can Save, Clear,…
STEAM Engine
Concepts » STEAM Engine
The STEAM Engine® is the core technology created by the Spectrasonics in-house development team, and is used as the basis of all Spectrasonics performance instruments, including Omnisphere, Keyscape, and Trilian. Like our core S.A.G.E. technology, used for…
Soundsources
Sharing » Adding Images to a Library » Soundsources
To add images to a single Soundsource, you will need three .jpg files with the following naming convention and dimensions: (replace “Soundsource Name” with the name of the Soundsource to which you want to add images): Soundsource Name.jpg [300w x…
Polyphonic
The Layer Pages » LFOs » Polyphonic
LFO 8 can be monophonic or polyphonic. When you select LFO 8, you will see a small button, labeled “P” in between the RATE and DEPTH knobs. Engaging it makes LFO 8 polyphonic, meaning each note will trigger it’s own LFO, instead of all notes…
Polyphonic
The Layer Pages » Envelopes » Envelope Zoom » Polyphonic
Mod Envelope 4 can be monophonic or polyphonic. When you select the MOD 4 tab in the Envelope Zoom, you will see a small button, labeled “P” to the right of the tab. Engaging it makes Mod Envelope 4 polyphonic, meaning each note will trigger…
Creating a Library
Sharing » Creating a Library
Patch Library To create a Patch Library, first make sure your host is not running, then locate the “Current Categories.zip” file here: Spectrasonics/STEAM/Omnisphere/Settings Library/Patches/Current Categories.zip Before uncompressing the Current…
Using Projects
The Browsers » Projects » Using Projects
A Project is a user-defined collection of sounds, organized in a single group. This can be applied in many useful ways. For example, Projects can be created and named according to current jobs, different sessions, songs, or styles. You can add Multis, Patches,…
FX Descriptions
The FX Page » FX Descriptions
There are 58 different professional-quality internal FX Units to choose from in Omnisphere (which can be expanded up to 66 via Sonic Extensions). For more detailed descriptions of the controls and operation, please click on the FX Unit names. DYNAMICS Tube…
Architecture and Hierarchy
Concepts » Architecture and Hierarchy
Omnisphere is a uniquely powerful synthesizer that takes well-known elements of synthesis a step further to provide inspiration for any level of musician, producer, composer, or sound designer. Omnisphere can quickly provide production-ready sounds with its factory…
Importing User Audio
User Audio » Importing User Audio
Omnisphere allows you to import your own audio to use as Soundsources and to create your own Patches and Multis. You can process and manipulate your own audio in creative ways using Omnisphere’s powerful synthesis capabilities. You might want to import a…
Optimizing Performance
Performing Live with Omnisphere » Optimizing Performance
The vast majority of Omnisphere Patches will play comfortably in your host, without over-stressing the computer’s CPU or memory. However, certain Patches employ more sophisticated effects or large numbers of streamed samples, and those may require special…
Sampling/Trademark FAQs
Legal » Sampling/Trademark FAQs
The purpose of this document is to clear up any confusion regarding the sampling of Spectrasonics Virtual Instruments. We get a lot of questions about this topic from other sound designers, so we’d like to make sure our policies are clear and upfront. The…
Software License Agreement
Legal » Software License Agreement
Spectrasonics virtual instruments come with two License Agreements, one for the software itself and another covering usage of the sounds. Below is an example of our standard Software License Agreement. We encourage potential users to see the extensive Licensing FAQs…
Performance Optimzation
Concepts » Performance Optimzation
The vast majority of Omnisphere Patches will play comfortably within your host, without over-stressing the computer’s CPU or memory. However some Patches employ sophisticated effects or large numbers of streamed samples, and those may require special attention.…