FX - Retro-Flanger

 

 

Flanging is a sweeping, comb-filter type effect.  The Retro-Flanger has special features that give the sound a more lo-fi, vintage character.

 

MINI-SLIDER

Controls the mix of the dry signal and the processed (Wet) signal.  The percentage indicated is the amount of the signal that is Wet. Range:  0 to 1

 

• PAGE ONE CONTROLS

RATE

Controls how fast or slow the Flanger cycles.  This is the Retro-Flanger’s LFO rate control. 

Range:

Synced:  32x,16x, 8x, 7x, 6x, 5x, 4x, 3x, 2x, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/96, 1/1dot, 1/2dot, 1/4dot, 1/8dot, 1/16dot, 1/1triplet, 1/2triplet, 1/4triplet, 1/8triplet, 1/16triplet. 

Unsynced:  0.00Hz to 15.000Hz

DEPTH

Controls how wide the sweep range of the LFO will be.  Range:  0.01 to 1

SYNC

Engages and Disengages synchronization of the LFO rate with the host's tempo.

DELAY

Controls the center frequency/delay time of the flanger.  Range:  0.005 to 0.1ms

FEEDBACK

Controls the amount of delay feedback, which produces a stronger flanging resonance 

Range:  0.01 to 0.99

INVERT

Reverses the phase of the delay feedback signal, producing a throatier flanging tone.  

LEVEL      

Adjusts the overall output volume.  Range: -infinity to 0 Unity gain.

 

• PAGE TWO CONTROLS

DIRT

Adds overdrive to the Retro-Flanger’s signal

TONE

This control is a simple tone filter control that adjusts the brightness of the signal.

Range: Tone Dark - Tone Bright

TONE FX

Applies the Tone setting to both the wet and dry signals, or just the wet signal.  Range: WET/DRY or WET

WIDTH

Controls the width of the stereo image of the Retro-Flanger signal. Range:  0-100%