Omnisphere 3

QuickStart

This QuickStart provides an overview of the essential things you’ill need to know in order to get started using Omnisphere.

  • Omnisphere is a powerful software instrument and can be run as a standalone application or hosted in any software DAW.
  • Omnisphere can be a memory-intensive instrument, especially when using Multis. A system with plenty of RAM will greatly enhance performance. Be sure and check out the Concepts: Performance Optimization chapter.

1. Install Omnisphere

Installation time will vary, depending on the installation type (USB drive or download). Once installed, the library will require about 64 GB of free hard drive space for the USB drive and approximately 128 GB of free space for the download installation process.

2. Authorize the Plug-in

Authorization can be done immediately from any computer connected to the Internet.

3. Get Everything Updated

Make sure you have the latest versions of the Software, Soundsources, and Patches:

  • Open Omnisphere and look at the left side of the splash screen.
  • If updates are available, you will see a “GET UPDATES” button with an “Updates are available!” note.

If it says “You are up-to-date” then no updates are necessary.

  • If updates are needed, click “GET UPDATES” and you will be taken to the System Status page in your web browser.
  • Status indicators in red mean that an update is necessary. Click the “GET UPDATES” button to download them.
  • After installing the updates, Omnisphere is ready to go!

    NOTE: Be sure to quit your host software before installing the downloaded updates.

4. Loading Sounds

There are three types of Browsers in Omnisphere from which you can load sounds: Patches, Multis, and Soundsources.
First, select a Part by clicking on a Part Number Button in the Header (Part 1 is pre-selected as the Default).

Mini-Browser

  • Choose a Library and then a Category.

  • Select a Patch in the Mini-Browser displayed on the left.

Full Patch Browser

  • Click the Patch Name Display under the title, “Omnisphere.”

  • The Full Patch Browser will open.
  • Choose a Library and then a Category.
  • Select a Patch in the column displayed on the lower right.

Multi Browser

  • Click the Multi Name Display in the Omnisphere Header.

  • The Multi Browser will open, allowing you to select and load Multis.

Soundsource Browser

  • Click the Soundsource Name Display below Layer A. If another Soundsource is present, it will be replaced by the one you are loading.

  • The Soundsource Browser will open, allowing you to select and load Soundsources.

5. Use Omnisphere Multi-timbrally

  • Omnisphere is a multi-timbral instrument, so you can use a single instance to load and play up to eight different sounds on different MIDI channels.

6. Explore and Learn

For more in-depth information, you can watch additional tutorials and especially explore this Reference Guide—the primary manual for Omnisphere. This detailed guide can be viewed on any computer and can be searched and even printed for easy access to the information you need.

7. Support Resources

Online resources are available that can answer most technical questions. Please visit our KnowledgeBase.

8. Have Fun!

Enjoy using Omnisphere and we hope you make some great music with it!

-The Spectrasonics Team

Need more help with this?
Spectrasonics Customer Support

Thanks for your feedback.