Gain

By default the Filter GAIN is set at 0.0db. Changing this control alters the Output level of the Filters. E.G. if the Filter is closed down and the tone is dark and low in output, the level can be compensated by using the FILTER GAIN control. More commonly, Filter combinations with Resonances can get too loud, causing distortion and clipping. Use the GAIN slider to reduce the overall level in these cases.

Range between – inf (0) and +9.54.dB

NOTE: Since audio signal volume can have an effect on the Filters, GAIN can be applied before or after the Filters from the Filter Zoom.