Waveforms

Each of Omnisphere’s LFOs can have its own Waveshape. There are nine available LFO Waveforms.

	Sine – A smooth c-shape that begins positive and then curves negative and back again. Useful for sweeps and vibrato.
	Triangle – A positive/negative-shape like the Sine, but without curvature. Useful for sweeps and vibrato.
	Square – Starts at maximum positive value and then drops to maximum negative value. Useful for trills and pulsing effects.
	Rounded Square – A smoothed Square Wave. Ideal for smooth pulsing.
	Ramp – A linear slope from highest to lowest value. This waveform is also frequently referred to as a sawtooth wave. Useful for sweeps.
	Reverse Ramp – A linear slope from lowest to highest value. This waveform is also frequently referred to as an inverted sawtooth wave. Useful for reverse sweeps.
	Sample and Hold – Steps through random values. Useful for analog synth effects.
	Heartbeat – Modeled after a human heartbeat.
	Random – Similar to Sample and Hold with random values, but doesn’t stop—the values change immediately. Useful for adding chaos.

*The Waveforms can be changed by clicking the UP/DOWN stepper buttons or by clicking on the Waveform itself, which will display the Waveform selection menu.