Solar Shimmer

Bringing the coveted “shimmer reverb sound” to Omnisphere, Solar Shimmer delivers on that and much more. With independent control over coarse pitch and detuning, you can dial in pristine, octave-shifted shimmering clouds or thick, disturbing clusters. Shape the tone with the Density and Filter controls, and use the Warm Mode for extra character. If you love it as much as we do, don’t forget to turn up Trails for infinite feedback!

• MINI-SLIDER
  Controls the mix of the dry signal and the processed signal. The number indicated represents the amount of the signal that is processed.
  Range: 0 ~ 100%

PAGE ONE CONTROLS

• DECAY
  
Adjusts the reverb length.
  Range: 0.00% ~ 100.00%

• TRAILS
  Adds a series of reverb tails that enhance the space. They get longer as you increase the control.
  Range: 0.00% ~ 100.00%

• FAR / NEAR
  Simulates proximity by controlling the amount of echoes and early reflections.

• SHIMMER
  Adds reverb grains an octave higher.
  Range: 0.00% ~ 100.00%

• PiTCH
  
Changes the pitch of the reverb.
  Range: – 12 ~ +12 Semitones

• DETUNE

  Adds a subtle pitch modulation to the reverb.
  Range: 0.00% ~ 10.00%

PAGE TWO CONTROLS

• DENSITY
  Controls the amount of reverb grains. At lower settings, you can hear individual grains, like individual delays. At higher settings, more grains blur together to create interesting beds.
  Range: 0.00% ~ 100.00%

• LO CUT
  Cuts low frequencies below a selectable point, allowing high frequencies to pass.
  Range: 0 Hz ~ 5 kHz

• DRIVE
  Adds saturation to the reverb’s input.
  Range: 0.00% ~ 100.00%

• TONE
  Basic tone control.
  Range: –10.00 ~ 10.00

• WARM / CLEAN
  Controls the color of the analog character.

• OUTPUT
  
Adjusts the output level.
  Range: –inf dB to +9.54 dB