Unstable Drifter

Craving for the sound of yesteryear? Bring back the vibe of dusty gear by dialing in noise, pitch artifacts, saturation, and filtering. Unstable Drifter is perfect for adding a subtle touch of nostalgia or turning the cleanest audio into a lofi gem.

• MINI-SLIDER
  Controls the mix of the dry signal and the processed signal. The number indicated is the amount of the signal that is processed.
  Range: 0 ~ 100%

PAGE ONE CONTROLS

• [DRIFT] SPEED
  Controls the speed of the pitch modulation.
  Range: 0% ~ 100%

• [DRIFT] DEPTH
  Controls the amount of pitch modulation.
  Range: 0% ~ 100%

• [NOISE] AMOUNT
  Controls the level of the added analog noise.
  Range: –60 dB ~ + 6dB

• [NOISE] SELECTOR
  Selects the noise source from either the:
• Boss CE-1 Chorus pedal
• Roland Juno 60
• Roland VP-330

• LOW CUT (HI PASS FILTER)

  Controls the filter cutoff frequency.
  Range: 20 Hz ~ 1.7 kHz

• HI CUT (LOW PASS FILTER)

  Controls the filter cutoff frequency.
  Range: 1.7 kHz ~ 20 kHz

PAGE TWO CONTROLS

• [CHORUS] AMOUNT
  Sets the level of the chorus effect, like a depth control.
  Range: 0 ~ 100.00

• [CHORUS] RATE
  Controls the speed of the pitch modulation.
  Range: 0.1 ~ 2.5 Hz

• [CHORUS] CHAOS
  This control introduces randomness to the modulation.
  Range: 0 ~ 100.00

• [CHORUS] DRIVE
  Adjusts the gain added to the input signal.
  Range: – 15.00 dB to +15.00 dB

• MONO
  Turning this ON collapses the signal of the Chorus section to mono.

• OUTPUT

  Adjusts the output level.
  Range: – inf dB to +9.54 dB