Omnisphere 3 Hardware Guide

Search

The topic you requested could not be found.
Related topics are listed below.

Hydrasynth

Synthesizers » Hydrasynth

The ASM Hydrasynth is a synthesizer with an advanced wavetable engine that mixes almost endless modulation capabilities with performance features, including a cool ribbon control and a keyboard with polyphonic aftertouch. For immediate control of Omnisphere, we…

Setting up the Hydrasynth

Synthesizers » Hydrasynth » Setting up the Hydrasynth

Setup To control Omnisphere using the Hydrasynth, you’ll need to do the following: Using a USB cable, connect the Hydrasynth to your computer. Set up the front panel controls to send MIDI CCs. Enable “Hydrasynth” as a MIDI input device to Omnisphere in…

Synthesizers

Synthesizers

Access Virus A Virus B Virus C Virus Indigo 1 Virus Indigo 2 Virus TI Alesis Andromeda A6 Arturia Matrixbrute MiniFreak ASM Hydrasynth Behringer DeepMind Pro-800 UB-Xa Wave IK Multimedia UNO Synth Korg microKorg microKorg…

Roland

Synthesizers » Roland

These are the Roland models currently supported by Omnisphere’s Hardware Integration: D-50 + PG-1000 Gaia SH-01 JD-08 JD-XA JD-Xi JP-08 JP-8000 JP-8080 JU-06 JU-06A JUNO-106 Jupiter-X Jupiter-Xm JX-03 JX-08 SE-02 SH-01A SH-201 SH-4d Super…

Moog

Synthesizers » Moog

These are the Moog models currently supported by Omnisphere’s Hardware Integration: Little Phatty Messenger Minitaur Muse One Sirin Slim Phatty Sub 37 Sub Phatty Subsequent 25 Subsequent 37 Voyager

Sequential

Synthesizers » Sequential

These are the Dave Smith Instruments/Sequential models currently supported by Omnisphere’s Hardware Integration: Mopho OB-6 Pro 2 Pro 3 Prophet 5 Prophet 6 Prophet ’08 Prophet X Prophet 12 REV2 Take 5 Trigon-6

Korg

Synthesizers » Korg

These are the Korg models currently supported by Omnisphere’s Hardware Integration: microKorg microKorg XL Minilogue Minilogue XD Monologue MS-20ic MS-2000 Prologue Radias

Nord

Synthesizers » Nord

These are the Nord models currently supported by Omnisphere’s Hardware Integration: Lead 1 Lead 2 Lead 3 Lead 4 Lead A1 Stage 3 Wave 1 Wave 2

Novation

Synthesizers » Novation

These are the Novation models currently supported by Omnisphere’s Hardware Integration: Bass Station II Circuit Mono Station K-Station Mininova Peak Summit X-Station

Access

Synthesizers » Access

These are the Access Virus models currently supported by Omnisphere’s Hardware Integration: Virus A Virus B Virus C Virus Indigo 1 Virus Indigo 2 Virus TI

Behringer

Synthesizers » Behringer

These are the Behringer models currently supported by Omnisphere’s Hardware Integration: DeepMind Pro-800 UB-Xa Wave

Modal

Synthesizers » Modal

These are the Modal models currently supported by Omnisphere’s Hardware Integration: Modal Argon8 Modal Cobalt5S Modal Cobalt8

UDO

Synthesizers » UDO

These are the UDO models currently supported by Omnisphere’s Hardware Integration: Super 6 Super 8 Super Gemini

Oberheim

Synthesizers » Oberheim

These are the Oberheim models currently supported by Omnisphere’s Hardware Integration: OB-X8 TEO-5

Arturia

Synthesizers » Arturia

These are the Arturia models currently supported by Omnisphere’s Hardware Integration: Arturia Matrixbrute Arturia Minifreak

Setting up the Matrixbrute

Synthesizers » Arturia » Arturia Matrixbrute » Setting up the Matrixbrute

Setup To control Omnisphere using the Matrixbrute, follow these steps: Connect the Matrixbrute to your computer via USB. Enable the Matrixbrute as a MIDI input device in the host software you’re using (DAW, Standalone, etc.). Activate the Matrixbrute…

Setting up the MiniFreak

Synthesizers » Arturia » Arturia MiniFreak » Setting up the MiniFreak

Setup To control Omnisphere using the Minifreak, follow these steps: Connect the Minifreak to your computer via USB. Set up the front panel controls to send MIDI CCs. Enable the Minifreak as a MIDI input device in the host software you’re using (DAW,…

Setting Up the PC4-7

Controllers » Kurzweil » Setting Up the PC4-7

When using the Kurzweil PC4-7 to control Omnisphere, the knobs on the PC4-7 will be assigned to the following Omnisphere parameters: Knob 1 (CC#71) – Global Controls Cutoff Knob 2 (CC#73) – Global Controls Resonance Knob 3 (CC#72) – Global…

Setting Up the PC4

Controllers » Kurzweil » Setting Up the PC4

When using the Kurzweil PC4 to control Omnisphere, the knobs on the PC4 will be assigned to the following Omnisphere parameters: Knob 1 (CC#71) – Global Controls Cutoff Knob 2 (CC#73) – Global Controls Resonance Knob 3 (CC#72) – Global…

Setting Up the K2700

Controllers » Kurzweil » Setting Up the K2700

When using the Kurzweil K2700 to control Omnisphere, the knobs on the K2700 will be assigned to the following Omnisphere parameters: Knob 1 (CC#71) – Global Controls Cutoff Knob 2 (CC#73) – Global Controls Resonance Knob 3 (CC#72) – Global…

Setting Up the PC4 SE

Controllers » Kurzweil » Setting Up the PC4 SE

When using the Kurzweil PC4 SE to control Omnisphere, the knobs on the PC4 SE will be assigned to the following Omnisphere parameters: Knob 1 (CC#14) – Global Controls Vibrato Depth Knob 2 (CC#17) – Global Controls Unison Knob 3 (CC#18) –…

Setting up the MS-20ic

Synthesizers » Korg » Korg MS-20ic » Setting up the MS-20ic

Setup To control Omnisphere using the Korg MS-2Oic controller, you’ll need to do the following: Download and install the Korg USB MIDI Driver from the Korg website. Note that Korg’s USB-MIDI Driver does not work in macOS Catalina or Big Sur. For more…

Setting up the Minilogue

Synthesizers » Korg » Korg Minilogue » Setting up the Minilogue

Setup To control Omnisphere using the Korg Minilogue, you’ll need to do the following: Using a USB cable, connect the Minilogue to your computer. Verify that your Minilogue is transmitting MIDI through USB. Enable the Minilogue as a MIDI input device to…

Setting up the Nord Lead 1

Synthesizers » Nord » Nord Lead 1 » Setting up the Nord Lead 1

Setup To control Omnisphere using the Nord Lead, you’ll need to do the following: Using a MIDI cable, connect the Nord Lead to your MIDI interface. Verify that your Nord Lead is transmitting MIDI and your MIDI interface is receiving MIDI. Set up the front…

Setting up the Nord Lead 2

Synthesizers » Nord » Nord Lead 2 » Setting up the Nord Lead 2

Setup To control Omnisphere using the Nord Lead 2, you’ll need to do the following: Using a MIDI cable, connect the Nord Lead 2 to your MIDI interface. Verify that your Nord Lead 2 is transmitting MIDI and your MIDI interface is receiving MIDI. Set up the…

Setting up the Prophet 6

Synthesizers » Sequential » Sequential Prophet 6 » Setting up the Prophet 6

Setup To control Omnisphere using the Prophet 6, you’ll need to do the following: Using a USB cable, connect the Prophet 6 to your computer. Verify that your Prophet 6 is transmitting MIDI through USB. Update the Prophet-6 to the latest operating…

Setting up the OB-6

Synthesizers » Sequential » Sequential OB-6 » Setting up the OB-6

Setup To control Omnisphere using the OB-6, you’ll need to do the following: Using a USB cable, connect the OB-6 to your computer. Verify that your OB-6 is transmitting MIDI through USB. Set up the front panel controls to NRPN mode. Enable the OB-6 as a…

Setting up the Monologue

Synthesizers » Korg » Korg Monologue » Setting up the Monologue

Setup To control Omnisphere using the Korg Monologue, you’ll need to do the following: Using a USB cable, connect the Monologue to your computer. Verify that your Monologue is transmitting MIDI through USB. Enable the Monologue as a MIDI input device to…

Setting up the Prophet X

Synthesizers » Sequential » Sequential Prophet X » Setting up the Prophet X

Setup To control Omnisphere using the Prophet X, you’ll need to do the following: Using a USB cable, connect the Prophet X to your computer. Verify that your Prophet X is transmitting MIDI through USB. Set up the front panel controls to NRPN mode. Enable…