Setup
To control Omnisphere using the Subsequent 25, you’ll need to do the following:
- Using a USB cable, connect the Subsequent 25, to your computer.
- Enable the Subsequent 25, as a MIDI input device to Omnisphere in the host software you’re using (DAW, Standalone, etc.).
- Activate the Subsequent 25, Hardware Profile in Omnisphere 3 or later.
HOST CONNECTION
Open your host (DAW, Standalone, etc.) and make sure the Subsequent 25 is enabled as a MIDI input device.
 |
 |
| Omnisphere Standalone | Pro Tools |
OMNISPHERE SETUP
Open Omnisphere and from the header, select the HW menu button:
From the drop-down menu, select “Moog>Moog Subsequent 25” to activate that hardware profile.
LOADING OMNISPHERE PATCHES FROM THE SUBSEQUENT 25
If you want the load Omnisphere Patches from the Subsequent 25, follow these steps:
- In the Omnisphere Patch Browser, right-click the name of the Patch you want to load.
- Select “MIDI Program Change Learn” from the menu.
- On the Subsequent 25, select the patch you wish to use.
- A MIDI icon will appear next to the name of the Patch in the Omnisphere browser if the learning is successful.
Unassigned Controls
The following Subsequent 25 controls have no effect on Omnisphere:
- Fine Tune
- Not all of the hidden features are mapped in Omnisphere’s Subsequent 25 hardware profile.
Troubleshooting
Not working? Here are some things to try:
- Make sure the MIDI Channel is set to Ch.1.
- Is the MIDI Out path set up properly?
- Is your DAW receiving MIDI from the Subsequent 25?’
SUPPORT
Still not working? More questions?
Feel free to contact us directly and we can work with you:
Tech Support
888-870-4223 toll free
818-955-8444
Monday – Friday 10AM – 5PM Pacific Time
email: info@spectrasonics.net
