Search

Roland JD-Xi

Roland » Roland JD-Xi

Ratings Control of Omnisphere Panel Layout Ease of Use Keyboard Feel Build Quality The Roland JD-Xi is a good option if you want some basic control over Omnisphere in a…

Roland JD-XA

Roland » Roland JD-XA

Ratings Control of Omnisphere Panel Layout Ease of Use Keyboard Feel Build Quality The Roland JD-XA is an interesting controller for Omnisphere. One of its most powerful…

Roland JP-08

Roland » Roland JP-08

Ratings Control of Omnisphere Panel Layout Ease of Use Build Quality For such a tiny synth, the Roland JP-08 gives you a decent amount of control over Omnisphere — LFO, two…

Setup To control Omnisphere using the Roland JD-Xi you’ll need to do the following: Connect the JD-Xi to your computer via USB. Verify that your JD-Xi system program is up to date with v1.51 (or higher). Download and install the Roland JD-Xi…

Roland

These are the Roland models currently supported by Omnisphere’s 2.8 Hardware Synth Integration: Roland D-50 + PG-1000 Roland GAIA SH-01 Roland JD-XA Roland JD-Xi Roland JP-08 Roland JP-8000 Roland JP-8080 Roland JU-06 Roland Juno-106 Roland…

Roland JP-8000

Roland » Roland JP-8000

Ratings Control of Omnisphere Panel Layout Ease of Use Keyboard Feel Build Quality The Roland JP-8000 is a virtual analog synth made in the mid-‘90s. It has become…

Roland System-1

Roland » Roland System-1

Ratings Control of Omnisphere Panel Layout Ease of Use Keyboard Feel Build Quality The Roland System-1 synth looks simple, but has enough control over Omnisphere to make…

Roland System-1m

Roland » Roland System-1m

Ratings Control of Omnisphere Panel Layout Ease of Use Build Quality The Roland System-1m differs from the System-1 in that it doesn’t have a keyboard or arpeggiator but adds CV…

Roland JX-03

Roland » Roland JX-03

Ratings Control of Omnisphere Panel Layout Ease of Use Build Quality It may not look like it, but there’s quite a lot that can be done with the JX-03’s features. Even though…

Roland VP-03

Roland » Roland VP-03

Ratings Control of Omnisphere Panel Layout Ease of Use Build Quality If you’re into the classic string machine sounds from the ’70s, this is a great controller for…

Roland JU-06

Roland » Roland JU-06

Ratings Control of Omnisphere Panel Layout Ease of Use Build Quality The Roland JU-06 gives you basic control over Omnisphere: if you love the Juno-style panel and want some simple Filter…

Roland Super Jupiter

Roland » Roland Super Jupiter

Ratings Control of Omnisphere Panel Layout Ease of Use Build Quality The Roland Super Jupiter is a classic analog synth that comes in a 2-space rack module. Most people who own it also…

Roland JP-8080

Roland » Roland JP-8080

Ratings Control of Omnisphere Panel Layout Ease of Use Build Quality The JP-8080 is a virtual analog synth Roland made in the mid-‘90s. It has become a modern classic, mostly…

Roland SE-02

Roland » Roland SE-02

Ratings Control of Omnisphere Panel Layout Ease of Use Build Quality The Roland SE-02 is a stunning-sounding analog mono synth with a Minimoog-style layout. The Oscillator section has…

Roland System-8

Roland » Roland System-8

Ratings Control of Omnisphere Panel Layout Ease of Use Keyboard Feel Build Quality The Roland System-8 has an intuitive and powerful panel, giving you a great amount of…

Roland SH-01A

Roland » Roland SH-01A

Ratings Control of Omnisphere Panel Layout Ease of Use Build Quality The Roland SH-01A is great for bass and you can use it with all kinds of Patches to control the level of…

Roland JUNO-106

Roland » Roland JUNO-106

Ratings Control of Omnisphere Panel Layout Ease of Use Keyboard Feel Build Quality The Roland Juno-106 is a classic analog polysynth and remains popular due to its great…

Roland SH-201

Roland » Roland SH-201

Ratings Control of Omnisphere Panel Layout Ease of Use Keyboard Feel Build Quality The Roland SH-201 is a virtual analog synth from the mid 2000’s. The panel is…

Roland GAIA SH-01

Roland » Roland GAIA SH-01

Ratings Control of Omnisphere Panel Layout Ease of Use Keyboard Feel Build Quality The Roland GAIA SH-01 is a great controller for Omnisphere. The most interesting…

Setting up the JD-XA

Roland » Roland JD-XA » Setting up the JD-XA

Setup To control Omnisphere using the Roland JD-XA, you’ll need to do the following: Connect the JD-XA to your computer via USB. Download and install the latest JD-XA system firmware. Download and install the JD-XA USB driver. Configure…

Roland D-50 + PG-1000

Roland » Roland D-50 + PG-1000

Ratings Control of Omnisphere Panel Layout Ease of Use Keyboard Feel Build Quality The Roland D-50 was a true phenomenon when it came out in the 1980s. It was on the…

Setting up the JP-08

Roland » Roland JP-08 » Setting up the JP-08

Setup To control Omnisphere using the JP-08, you’ll need to do the following: Using a USB cable, connect the JP-08 to your computer. Verify that your JP-08 system firmware is up to date with v1.20 or higher. Verify that your JP-08 is…

Hardware Profile Guide

These are the models currently supported by Omnisphere’s Hardware Synth Integration. Access Virus A Access Virus B Access Virus C Access Virus Indigo 1 Access Virus Indigo 2 Access Virus T1 Alesis Andromeda A6 Behringer DeepMind Korg microKorg Korg…

Using SysEx on Windows

The following models have controls that send System Exclusive (SysEx) messages: - Access Virus C - Access Virus TI - Roland D50 + PG1000 - Roland GAIA - Roland JD-XA - Roland JD-Xi - Roland JP-8000 - Roland JP-8080 - Roland JUNO-106 - Roland SH-201 - Roland Super…

Setting up the System-1

Roland » Roland System-1 » Setting up the System-1

Setup To control Omnisphere using the Roland System-1, you’ll need to do the following: Using a USB cable, connect the System-1 to your computer. Verify that your System-1 system firmware is up to date with v1.30 or higher. Download and…

Setting up the GAIA SH-01

Roland » Roland GAIA SH-01 » Setting up the GAIA SH-01

Setup To control Omnisphere using the Roland GAIA SH-01, you’ll need to do the following: Connect the GAIA SH-01 to your computer via USB. Download and install the GAIA SH-01’s latest firmware update. Download and install the GAIA…

Setting up the JUNO-106

Roland » Roland JUNO-106 » Setting up the JUNO-106

Setup To control Omnisphere using the the Roland JUNO-106, you’ll need to do the following: Connect the JUNO-106 to your computer’s MIDI interface. Set the JUNO-106’s MIDI Function Selector Switch to position…

Setting up the System-1m

Roland » Roland System-1m » Setting up the System-1m

Setup To control Omnisphere using the Roland System-1m, you’ll need to do the following: Using a USB cable, connect the System-1m to your computer. Verify that your System-1m system firmware is up to date with v1.30 or higher. Download and…

Setting up the SH-201

Roland » Roland SH-201 » Setting up the SH-201

Setup To control Omnisphere using the Roland SH-201, you’ll need to do the following: Connect the Roland SH-201 to your MIDI interface. Make certain your MIDI interface is configured as the input in the host software you’re using (DAW, Standalone,…

Setting up the D-50 + PG-1000

Roland » Roland D-50 + PG-1000 » Setting up the D-50 + PG-1000

Setup To control Omnisphere using the the PG-1000, you’ll need to do the following: Connect the MIDI out of the PG-1000 to your MIDI interface. Make certain your MIDI interface is configured as the input in the host software you’re using (DAW,…

Setting up the VP-03

Roland » Roland VP-03 » Setting up the VP-03

Setup To control Omnisphere using the VP-03, you’ll need to do the following: Using a USB cable, connect the VP-03 to your computer. Download and install the appropriate VP-03 USB driver on your computer. Enable “Boutique” as a MIDI input…

Setting up the Super Jupiter

Roland » Roland Super Jupiter » Setting up the Super Jupiter

Setup To control Omnisphere using the Roland MKS-80 and the MPG-80, you’ll need to do the following: Connect the MKS-80 to your MIDI interface. Set up the MKS-80 to receive/transmit System Exclusive messages. Activate the Roland MKS-80…

Setting up the JP-8080

Roland » Roland JP-8080 » Setting up the JP-8080

Setup To control Omnisphere using the the Roland JP-8080, you’ll need to do the following: Connect the JP-8080 to your MIDI interface. Set up the JP-8080’s front panel controls to transmit MIDI. Activate the Roland JP-8080 Hardware…

Setting up the SH-01A

Roland » Roland SH-01A » Setting up the SH-01A

Setup To control Omnisphere using the SH-01A, you’ll need to do the following: Using a USB cable, connect the SH-01A to your computer. Download and install the appropriate SH-01A USB driver on your computer. Enable “Boutique” as a MIDI…

Setting up the SE-02

Roland » Roland SE-02 » Setting up the SE-02

Setup To control Omnisphere using the SE-02, you’ll need to do the following: Using a USB cable, connect the SE-02 to your computer. Download and install the appropriate SE-02 USB driver on your computer. Verify that your SE-02 is transmitting…

Setting up the JU-06

Roland » Roland JU-06 » Setting up the JU-06

Setup To control Omnisphere using the JU-06, you’ll need to do the following: Using a USB cable, connect the JU-06 to your computer. Verify that your JU-06 system firmware is up to date with v1.20 or higher. Verify that your JU-06 is…

Setting up the JX-03

Roland » Roland JX-03 » Setting up the JX-03

Setup To control Omnisphere using the JX-03, you’ll need to do the following: Using a USB cable, connect the JX-03 to your computer. Verify that your JX-03 system firmware is up to date with v1.11 or higher. Verify that your JX-03 is…

Setting up the System-8

Roland » Roland System-8 » Setting up the System-8

Setup To control Omnisphere using the Roland System-8, you’ll need to do the following: Using a USB cable, connect the System-8 to your computer. Verify that your System-8 system firmware is up to date with v1.12 or higher. Download and…

Setting up the JP-8000

Roland » Roland JP-8000 » Setting up the JP-8000

Setup To control Omnisphere using the the Roland JP-8000, you’ll need to do the following: Connect the JP-8000 to your MIDI interface. Set up the JP-8000’s front panel controls to transmit MIDI. Activate the Roland JP-8000 Hardware…

Behringer DeepMind

Ratings Control of Omnisphere Panel Layout Ease of Use Keyboard Feel Build Quality The Behringer DeepMind is based on the Roland Juno-106. If you’d like to have…

Sequential

These are the Dave Smith Instruments/Sequential models currently supported by Omnisphere’s 2.8 Hardware Synth Integration: Sequential Mopho Sequential OB-6 Sequential Pro 2 Sequential Prophet 6 Sequential Prophet ’08 Sequential Prophet X Sequential…

Setting up the Nord Lead 1

Nord » Nord Lead 1 » Setting up the Nord Lead 1

Setup To control Omnisphere using the Nord Lead, you’ll need to do the following: Using a MIDI cable, connect the Nord Lead to your MIDI interface. Verify that your Nord Lead is transmitting MIDI and your MIDI interface is receiving MIDI. Set…

Setting up the Nord Lead 2

Nord » Nord Lead 2 » Setting up the Nord Lead 2

Setup To control Omnisphere using the Nord Lead 2, you’ll need to do the following: Using a MIDI cable, connect the Nord Lead 2 to your MIDI interface. Verify that your Nord Lead 2 is transmitting MIDI and your MIDI interface is receiving…

Setting up the MS-20ic

Korg » Korg MS-20ic » Setting up the MS-20ic

Setup To control Omnisphere using the Korg MS-2Oic controller, you’ll need to do the following: Download and install the Korg USB MIDI Driver from the Korg website. Note that Korg’s USB-MIDI Driver does not work in macOS Catalina or Big Sur. For more…

Setting up the Minilogue

Korg » Korg Minilogue » Setting up the Minilogue

Setup To control Omnisphere using the Korg Minilogue, you’ll need to do the following: Using a USB cable, connect the Minilogue to your computer. Verify that your Minilogue is transmitting MIDI through USB. Enable the Minilogue as a MIDI input…

Setting up the OB-6

Sequential » Sequential OB-6 » Setting up the OB-6

Setup To control Omnisphere using the OB-6, you’ll need to do the following: Using a USB cable, connect the OB-6 to your computer. Verify that your OB-6 is transmitting MIDI through USB. Set up the front panel controls to NRPN…

Setting up the Prophet 6

Sequential » Sequential Prophet 6 » Setting up the Prophet 6

Setup To control Omnisphere using the Prophet 6, you’ll need to do the following: Using a USB cable, connect the Prophet 6 to your computer. Verify that your Prophet 6 is transmitting MIDI through USB. Update the Prophet-6 to the latest…

Setting up the Monologue

Korg » Korg Monologue » Setting up the Monologue

Setup To control Omnisphere using the Korg Monologue, you’ll need to do the following: Using a USB cable, connect the Monologue to your computer. Verify that your Monologue is transmitting MIDI through USB. Enable the Monologue as a MIDI input…

Setting up the Prophet X

Sequential » Sequential Prophet X » Setting up the Prophet X

Setup To control Omnisphere using the Prophet X, you’ll need to do the following: Using a USB cable, connect the Prophet X to your computer. Verify that your Prophet X is transmitting MIDI through USB. Set up the front panel controls to NRPN…