Stylus RMX

BPM Delay X2


The BPM Delay X2 offers dual monoaural delays that are always synchronized to the host’s tempo. The feedback and drive controls can produce some cool sounds with the built-in resonant filtering.

MINI-SLIDER
Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet.
Range: 0 to 100%

PAGE ONE CONTROLS

  • [DELAY1] LEVEL
    Controls the volume of the delayed audio.
    Range: -inf to 0dB
  • [DELAY1] DELAY
    Drop-down menu that allows you to choose the time value of the delayed audio.
    Choices: 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/96, 1/1dot, 1/2dot, 1/4dot, 1/8dot, 1/16dot, 1/1triplet, 1/2triplet, 1/4triplet, 1/8triplet, 1/16triplet
  • [DELAY1] PAN
    Controls the spatial placement of the delayed audio in the stereo field.
  • [DELAY2] LEVEL
    Controls the volume of the delayed audio.
    Range: -inf to 0 dB
  • [DELAY2] DELAY
    Drop-down menu that allows you to choose the time value of the delayed audio.
    Choices: 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/96, 1/1dot, 1/2dot, 1/4dot, 1/8dot, 1/16dot, 1/1triplet, 1/2triplet, 1/4triplet, 1/8triplet, 1/16triplet
  • [DELAY2] PAN
    Controls the spatial placement of the delayed audio in the stereo field.
  • FEEDBACK
    Feeds the delay signal back to the input for echo repeats.
    Range: 0 to 1

PAGE TWO CONTROLS

  • [COLOR] TONE
    Controls whether the delayed audio goes through a high-pass or low-pass filter. In the center, the filter is turned off, similar to the Master Filter on the Edit Page.
    Range: 0 to 1
  • [COLOR] EMPH
    Controls the resonance of the Tone control cutoff frequency.
    Range: 0 to 1
  • [COLOR] FEEDBACK TONE
    Inserts the Overdrive and Tone Filter into the Feedback Loop. This is useful for producing echoes that get darker with each successive repeat and for creating infinite dub-style echo feedback.
  • [OVERDRIVE] TYPE
    Selects between Odd or Even harmonic distortion.
  • [OVERDRIVE] DRIVE
    Controls the amount of overdrive distortion.
    Range: 0 to 1
  • [OVERDRIVE] PRE / POST
    Lets you position the Overdrive before or after the Tone Control.
  • GAIN
    Adjusts the overall output.
    Range: 0 to 1