PRO Phaser

The PRO Phaser FX unit is one of the most versatile and rich phaser designs ever. It is also capable of producing a wide array of unique sounds beyond traditional phaser effects, including tuned resonances, strange pitch-bending effects and envelope followed phasing, and more.

MINI-SLIDER
Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet.
Range: 0 to 100%

PAGE ONE CONTROLS

• [LFO] RATE
  Controls how fast or slow the LFO cycles.
  Range:
  Synced: 32x,16x, 8x, 7x, 6x, 5x, 4x, 3x, 2x, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/96, 1/1dot, 1/2dot, 1/4dot, 1/8dot, 1/16dot, 1/1triplet, 1/2triplet, 1/4triplet, 1/8triplet, 1/16triplet
  Unsynced: 0.00Hz to 15.00 Hz

• [LFO] MIN
  Controls the minimum point of modulation depth of the LFO.
  Range: 0 to 100%

• [LFO] MAX
  Controls the maximum point of modulation depth of the LFO.
  Range: 0 to 100%

• POLES
  Drop-down menu that selects how many stages or “poles” used by the Phaser. More poles equals a more resonant sound character.
  Choices: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 poles

• SYNC
  Engages and disengages synchronization of the LFO rate with the host’s tempo.

• WIDTH
  Controls the width of the stereo image.
  _Range: 0 to 360º

• FEEDBACK
  Controls the amount of resonance/feedback of the Phaser. High settings will oscillate.
  Range: 0 to 100%

PAGE TWO CONTROLS

• SOURCE
  Continuous mix control to blend between LFO and Envelope Follower modulation sources.
  Range: 0 to 100%

• [ENVELOPE] ATTACK
  The time of the Envelope Follower modulation beginning slope.
  Range: 0 to 400 ms

• [ENVELOPE] RELEASE
  The time of the Envelope Follower modulation ending slope.
  Range: 0 to 1000 ms

• [ENVELOPE] MIN
  Controls the minimum point of modulation depth of the Envelope.
  Range: 0 to 100%

• [ENVELOPE] MAX
  Controls the maximum point of modulation depth of the Envelope.
  Range: 0 to 100%

• DRIVE
  Controls the amount of overdrive at the final output.
  Range: 0 to 100

• LEVEL
  Adjusts the overall output.
  Range: -200 to +10 dB