Stylus RMX

PRO Verb


PRO Verb is the premier, studio-quality reverb unit in the RMX FX arsenal. It’s versatile and can achieve not only great Room, Plate, and Hall simulations, but it’s also capable of producing unusual metallic resonances and special effects. Be sure to check out the large array of Factory Patches for PRO Verb.

MINI-SLIDER
Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet.
Range: 0 to 100%

PAGE ONE CONTROLS

  • SIZE
    Controls the Room / Hall size.
    Range: 0 to 100
  • TIME
    Controls the overall length of the reverb.
    Range: 100 to 20000 ms
  • PREDELAY
    Controls the amount it takes for the first reflection to appear.
    Range: 0 to 500 ms
  • CPU LOAD
    Controls the quality of the reverb by adjusting how much CPU power is used. Also useful for varying density.
    Range: 0 to 100%
  • DENSITY
    Controls the smoothness of the reflections.
    Range: 0 to 1000
  • [TONE] LOWS
    Controls the level of the low frequencies.
    Range: -18 to +6 dB
  • [TONE] HIGHS
    Controls the level of the high frequencies.
    Range: -18 to +6 dB

PAGE TWO CONTROLS

  • [REVERB SHAPING] LO FREQ
    Chooses the low crossover frequency.
    Range: 25 to 1000 Hz
  • [REVERB SHAPING] LO TIME
    Controls the length of the reverb’s Low Frequencies.
    Range: 10 to 400
  • [REVERB SHAPING] HI FREQ
    Chooses the high crossover frequency.
    Range: 500 to 22000 Hz
  • [REVERB SHAPING] HI TIME
    Controls the length of the reverb’s High Frequencies.
    Range: 10 to 400
  • WIDTH
    Adjusts the stereo width of the Wet signal.
    Range: 0 to 100%
  • DIFFUSION
    Controls the amount of chaotic variation in the reflections.
    Range: 0 to 100
  • FREEZE
    Locks the buffered reverb signal to create an infinite reverb effect.

NOTE: The Freeze buffer is cleared when RMX is closed. To save the Freeze buffer, you need to render RMX to an audio file.