The Spring Verb faithfully recreates the retro vibe of the spring reverbs in 1960s-era guitar amplifiers.

MINI-SLIDER
Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet.
Range: 0 to 100%

PAGE ONE CONTROLS

  • [REVERBERATION] TIME
    Controls the length of the reverb.
    Range: 0 to 100%
  • [REVERBERATION] TONE
    Controls the tone color of the reverb.
    Range: -10 to +10
  • [REVERBERATION] WIDTH
    Controls the stereo width of the audio. Full left is Mono, Center is normal stereo and full right is ultra-wide “simulated” Stereo.

PAGE TWO CONTROLS

  • [TONE] EQ
    Engages and disengages the EQ Tone controls.
  • [TONE] BASS
    Controls the amount of low frequencies.
    Range: -15 to +15 dB
  • [TONE] TREBLE
    Controls the amount of high frequencies.
    Range: -15 to +15 dB
  • [TONE] INSERT
    Allows you to position the EQ before or after the reverb.
    Choices: PRE or POST
  • GAIN
    Adjusts the overall output.
    Range: -24 to +24 dB