Vintage EQ2

The Vintage 2-Band Equalizer FX unit was modeled after the fixed-frequency design of the vintage Pultec™ EQP2-A model tube equalizer. The unique characteristic of this classic design is that on each EQ band, the same frequency can be broadly cut and boosted simultaneously. It also includes a gentle low pass filter for the hi-band, which results in warm and musical tones that can give you a lot of gain without sounding harsh.

• (LOW BAND) BOOST
  Increases gain of the selected frequency.
  Range: 0 to +20 dB

• (LOW BAND) FREQ
  Drop-down menu to select frequency.
  Options: 20, 30, 50, 60, 75, 100, 200 Hertz

• (LOW BAND) CUT
  Reduces the gain of the selected frequency.
  Range: 0 to -20 dB

• (HIGH BAND) BOOST
  Increases gain of the selected frequency.
  Range: 0 to +20 dB

• (HIGH BAND) Q
  Controls the Resonance or EQ Bandwidth of the selected frequency.
  Range: 0 to 1

• (HIGH BAND) FREQ
  Drop-down menu that provides EQ frequency
  Choices of 2000, 3000, 4000, 5000, 8000, 10000, 12000, 140000, 16000, 18000 Hertz

• (HIGH BAND) CUT
  Reduces the gain of the selected frequency.
  Range: 0 to -20 dB

• (HIGH BAND) FILTER
  Adjusts the Frequency cutoff of the Low Pass Filter.
  Range: 5000 to 18000 Hz