Flanging is a sweeping, comb-filter-type effect. The Retro Flanger has special features that give the sound a more lo-fi, vintage character.
Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet.
Range: 0 to 1
PAGE ONE CONTROLS
Controls the speed at which the Flanger cycles. This is the Retro-Flanger’s LFO rate control.
Synced: 32x,16x, 8x, 7x, 6x, 5x, 4x, 3x, 2x, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/96, 1/1dot, 1/2dot, 1/4dot, 1/8dot, 1/16dot, 1/1triplet, 1/2triplet, 1/4triplet, 1/8triplet, 1/16triplet
Unsynced: 0.00Hz to 15.000Hz
Controls the sweep range of the LFO.
Range: 0.01 to 1
Engages and Disengages synchronization of the LFO rate with the host’s tempo.
Controls the center frequency/delay time of the Flanger.
Range: 0.005 to 0.1 ms
Controls the amount of delay feedback, which produces a stronger resonance.
Range: 0.01 to 0.99
Reverses the phase of the delay feedback signal, producing a throatier tone.
Adjusts the overall output.
Range: -inf to 0 Unity gain
PAGE TWO CONTROLS
Adds overdrive to the Retro-Flanger’s signal.
This control is a simple tone control that adjusts brightness.
Range: Dark – Bright
- TONE FX
Applies the Tone setting to both the Wet and Dry signals, or just the Wet signal.
Range: WET / DRY or WET
Controls the width of the stereo image.