Ultra Chorus

Chorus is a pitch and delay effect that adds a rich, shimmering quality to a sound by detuning and delaying the incoming signal and combining it with the unaffected signal. The Ultra Chorus has a dedicated LFO—a ‘LUSH’ control, which gives this unit a dense, rich character.

MINI-SLIDER
Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet.
Range: 0 to 100%

PAGE ONE CONTROLS

• RATE
  This control sets the cycle speed of the LFO. Minimum settings will produces a sweeping effect, higher settings cause a more warbling effect.
  Range: 0.00Hz to 15.00 Hz

• DEPTH
  The Depth control adjusts the amount of the LFO pitch modulation.
  Range: 0.01 to 0.98

• DELAY
  Controls the Delay time.
  Range: 0.00 to 1.00

• SHAPE
  These three waveforms control the contour of the pitch change that is applied to the delay.

1. Sine – A symmetrical, smoothly cycling wave.
2. Random – Asymmetrical changes in the wave make randomized pitch changes.
3. Linear – A symmetrical, linear cycle.

• LUSH
  Sums the left and right signal, adding density to the sound.

PAGE TWO CONTROLS

• FEEDBACK
  Applied to the Delay, Feedback repeats the delays for more sonic density. At minimum settings the difference is minor, and at maximum settings it creates flanging, metallic overtones.
  Range: 0.01 to 0.98

• INVERT
  Reverses the phase of the chorus.

• WIDTH
  Pans the chorused signal to left and right, widening the stereo image.
  Range: 0.00 to 1.00

• TONE
  Tone is a combination High-Pass and Low-Pass filter. When set at 12-O’Clock (.500) the Tone is neutral. When shifted clockwise, a high-pass filter is applied, and when changed counter-clockwise, a low-pass filter is applied.
  Range: 0.00 to 1.00

• LEVEL
  Adjusts the overall output.
  Range: -inf to 0.00