Imager

The Imager is a “Swiss Army Knife” utility device that can be used as a panner, stereo/mono image control, L/R channel inverter, phase corrector, auto-panner, and gain control.

• PAN
  Controls the placement and balance of the audio within the stereo field.
  Range: -100% Left to 100% Right

• IMAGE
  Controls the stereo width of the audio. Center is normal stereo.
  Range: Mono ( -100%) to Wide Stereo (+100%)

• SWAP L/R
  Allows you to swap the Left and Right Channels of a stereo audio source.
  Options: L/R, R/L

• PHASE
  Allows control over phase relationship between Left and Right Channels.
  Menu options: Normal, Inverted, Inverted-Left Channel, Inverted-Right Channel

• [AUTO PAN] RATE
  Controls how fast or slow the auto-panning will occur.
  When Synced: 16x, 8x, 7x, 6x, 5x, 4x, 3x, 2x, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/2D, 1/4D, 1/8D, 1/16D, 1/2T, 1/4T, 1/8T, 1/16T
  Unsynced: 0 to 8.8 Hz

• [AUTO PAN] DEPTH
  Controls how much auto-panning occurs.
  Range: OFF to 100%

• [AUTO PAN] SYNC
  Engages and disengages auto-pan synchronization with the host’s tempo.

• GAIN
  Adjusts the overall output volume.
  Range: 0 to 13 dB