PRO Verb

PRO Verb is the premier, studio-quality reverb unit in the Trilian FX arsenal. It’s very versatile and can achieve not only great Room, Plate, and Hall simulations, but it’s also capable of producing unusual metallic resonances and special effects. Be sure to check out the large array of Factory Patches for PRO Verb, as they demonstrate the range of possibilities.

MINI-SLIDER
Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet.
Range: 0 ~ 100%

PAGE ONE CONTROLS

• SIZE
  Controls the Room/Hall size of the reverberation.
  Range: 0 ~ 100

• TIME
  Controls the overall length of the reverb.
  Range: 100 ~ 20000 ms

• PREDELAY
  Controls the time it takes for the first reflection to appear.
  Range: 0 ~ 500 ms

• CPU LOAD
  Controls the quality of the reverb by allowing to plug-in to use more or less CPU power to create a higher or lower resolution of the reverb effect. Also very useful for making different density variations.
  Range: 0 ~ 100%

• DENSITY
  Controls the smoothness or coarseness of the reflections.
  Range: 0 ~ 1000

• [TONE] LOWS
  Controls the level of the reverb’s low frequencies.
  Range: -18 ~ +6 dB

• [TONE] HIGHS
  Controls the level of the reverb’s high frequencies.
  Range: -18 ~ +6 dB

PAGE TWO CONTROLS

• [REVERB SHAPING] LO FREQ
  Chooses the low crossover frequency of the reverb signal.
  Range: 25 ~ 1000 Hz

• [REVERB SHAPING] LO TIME
  Controls the specific length of the reverb’s low frequencies.
  Range: 10 ~ 400

• [REVERB SHAPING] HI FREQ
  Chooses the high crossover frequency of the reverb signal.
  Range: 500 ~ 22000 Hz

• [REVERB SHAPING] HI TIME
  Controls the specific length of the reverb’s high frequencies.
  Range: 10 ~ 400

• WIDTH
  Adjusts the stereo width of the Wet signal.
  Range: 0 ~ 100%

• DIFFUSION
  Controls the amount of chaotic variation in the reverb reflections.
  Range: 0 ~ 100

• FREEZE
  Locks the reverb signal that is currently in the buffer to create an infinite reverb effect.

NOTE: The Freeze buffer is cleared when Trilian is closed. To save the Freeze buffer, you need to render Trilian to an audio file.