The VALVE RADIO FX unit is a unique device, which functions equally well as both a dual filter and a distortion device. The combination of these two effects can product many types of vintage radio and telephone speaker simulation effects. This unit also includes a simple noise gate on Page 2.
MINI-SLIDER
Controls the mix of the dry signal and the processed (Wet) signal. The percentage indicated is the amount of the signal that is Wet.
Range: 0 ~ 100%
PAGE ONE CONTROLS
- LOPASS
Controls the frequency cutoff of the Low Pass filter.
Range: 100 ~ 22000 Hz
- HIPASS
Controls the frequency cutoff of the High Pass filter.
Range: 20 ~ 10000 Hz
- Q
Controls the Resonance or “Q” of the two filters, which emphasizes the cutoff frequencies.
Range: .5 ~ 3.0
- DRIVE
Increases the amount of overdrive distortion gain.
Range: 0 ~ 100%
PAGE TWO CONTROLS
- GATE
Sets the audio level at which the threshold for the Gate starts to open.
Range: 0 ~ 35 dB
- ATTACK
Adjusts the speed at which the gate opens.
Range: 1 ms ~ 400 ms
- RELEASE
Adjusts the speed at which the gate closes.
50 ~ 4000ms
- GAIN
Adjusts the overall output.
Range: 0.00 ~ 3.50 dB
Need more help with this?
Spectrasonics Customer Support