MIXER - Level & Pan

 

Level

 

Each Part has a Part Level fader. Moving the fader to the left decreases volume, moving the fader to right increases volume.

The Level Meter displays the Part’s current signal level. Although the meter can go into the “red”, Omnisphere will rarely distort on the Part level, so distortion is not a problem at this stage.

Range -inf to + 9.54dB

NOTE: Use Command/CTRL-click to reset the fader to 0dB.

 

Pan

 

Each Part has a Pan control. Moving the knob counter-clockwise pans to the left.  Moving the knob clockwise pans to the right.

Range 0.000 to 1.000