Each of the four Aux Sends has its own FX Rack (accessed by selecting the FX Button at the top of the MIXER). The AUX1 ~ AUX4 knobs let you control the amount of FX applied to the Part.
NOTE: The Aux Sends FX are shared by all 8 Parts in the MULTI. Please see the FX chapter for a signal flow diagram.
CPU CONSERVATION AND MUTING
When all 32 Aux Send knobs are in the zero position (fully counter-clockwise), all Aux Send FX will be internally bypassed to conserve CPU power.
Conversely, if any one of the Aux Send knobs is not in the zero position, then all Aux Send FX will be enabled.
To conserve CPU power, please make sure that all Aux Sends on the MIXER page are in the zero position when not in use.
Need more help with this?
Spectrasonics Customer Support
