The ENVELOPE FILTER uses Omnisphere’s filters with an envelope follower, adding sonic animation to the envelope of a sound. Includes a cool compressor on Page 2 to squash those filtered sounds! Great for use with Clavinets and electric guitars, and anything else you want to liven up.

    Controls the balance of the dry signal and the processed (wet) signal. The percentage indicates the amount of the signal that is wet.
    Range: 0 ~ 100%


  • SENS
    Controls the depth of the envelope applied to the filter.
    Range: 0.00 ~ 0.50
    Controls the response of the envelope follower. The envelope reacts faster at lower settings and slower at higher settings.
    Range: 0.00 ~ 1.00
    Inverts the contour of the envelope follower.
  • TYPE
    Drop-down menu determines the filter type.
  • RESO
    Controls the amount of filter resonance.
    Range: 0.00 ~ 1.00
  • GAIN
    Master volume.  
    Range: -inf ~ 9.54 dB


    Adjusts the cutoff frequency for the chosen filter on Page 1. The higher the SENS value, the more effect it has on the CUTOFF.
    Range: 0.50 Khz ~ 19.00 KHz
    The SPREAD control moves the cutoff frequency in one direction in the stereo field while moving it in the opposite direction on the other side of the stereo field.
    Range: 0.00 ~ 1.00
    Engages and disengages the compressor through which the filter is fed before the output.
    Sets the input level to the compressor.
    Range: -12.0 ~ 12.0
    Controls both the threshold and output gain of the compression effect. Higher settings lower the threshold and cause more gain to be made up, while lowering the attack.
    Range: 0 dB ~ 36.0 dB
    Adjusts the amount of time that the compressor takes to stop compressing once the audio has dipped under the threshold level.
    Range: 0.1 sec ~ 2.5 sec
    A gain make-up stage that adjusts the overall output volume to compensate for compression level reduction.
    Range: 0.00 ~ 1.00

Need more help with this?
Spectrasonics Customer Support

Thanks for your feedback.