Each Layer has Level and Pan controls in addition to an AMP control—these are commonly used as modulation targets.


The level sliders are used to blend the Layers. Often, even a subtle change in level can affect the sound dramatically.

Range -inf dB (silence) to +9.54dB

To quickly set the Level to 0dB (unity gain), select the slider when holding down the Command key (Mac) or Control key (Windows). 

Range -inf dB (silence) ~ +9.54dB


Below each of the Layer Level sliders are ON/OFF buttons that determine whether or not a Layer is active. They also can be used to mute any Layer in order to make comparisons without having to adjust the Layer Level faders. These buttons can also be used to bring a Layer’s Edit Page into focus.


The Layer PAN knob provides independent PAN control for each Layer. The PAN controls can also be modulated independently.

To quickly return the PAN value to Center, Command/Control-click the PAN knob.

Range 0.000 ~ 1.000


This is a pre-Layer Level Amplitude control designed to be used as a modulation target. For example, if you bring AMP all the way down then right-click on the fader and navigate to Modulate with LFO, you will hear the Amplitude of that Layer being modulated. To change the overall level of the Layer, use the Layer Level slider.

Need more help with this?
Spectrasonics Customer Support

Thanks for your feedback.