San-Z Amp

SAN-Z-AMP is modeled after the trend-setting SansAmp GT-2™ tube amplifier emulation pedal. It has a full set of amplifier controls and a selection of impulse responses simulating selectable, high-end mic and preamp combinations  

• DRIVE
  Sometimes referred to as overdrive, DRIVE sets the amount the amplifier is overloaded, causing distortion. The higher this control is set, the more distorted the signal.
  Range: 0.00 ~ 10.00

• LOW
  Bipolar control which cuts or boosts low frequencies. 
  Range: 0.00 ~ 10.00

• HIGH
  Bipolar control which cuts or boosts mid-range frequencies.
  Range: 0.00 ~ 10.00

• MIC
  This drop-down menu is used to control the mic placement.
  The options are: Off-Axis, Center, and Classic

• MOD
  This drop-down menu is used to select either the default amp setting (Clean), a gain boost setting (Hot-Wired), or a high-gain tone with scooped mid-range (Hi Gain).

• AMP
  This drop-down menu allows you to select the different amplifiers after which this unit has been modeled:

1. American Tweed (Fender)
2. Classic British (Vox)
3. Modern California (boutique)

• LEVEL
  Master volume.
  Range: 0.00 ~ 10.00