Omnisphere has a wide variety of customized filter configurations, called Presets. The presets represent the settings of Omnisphere’s complex dual stereo filter. Filter presets can be selected, copied, pasted, and saved from this menu.

TIP: If you find a Patch that has an interesting custom filter configuration, you can save it into your Preset library to use with your own Patches.

The Presets are categorized into several sub-categories; Bandpass Filters, Highpass Filters, Lowpass Filters, and Specialty Filters.
For the sake of space, the preset names are abbreviated:

BPF Band Pass Filter
HPF High Pass Filter
LPF Low Pass Filter
UVI UVI Filter from Atmosphere®
db Short for Decibel. Names like 12db, 24db, refer to the roll off slope of the filters.

NOTE: Filter presets are not the same as Filter types. Filter Presets include the Filter types, Gain, routing, and offsets. Filter types are covered in the FILTER ZOOM section.

FILTER PRESET MENU

After a Preset has been chosen from the drop-down menu, the name will be displayed in the Preset display window:

If the filter types are changed in the FILTER ZOOM view, the display will be changed to “Modified” until the Filter settings are saved as a Preset or another Preset is selected.

NOTE: Filter Presets do not recall CUTOFF, RES, KEY, and ENV settings. This is the most accurate way to audition the different Filter Presets within the context of your current Patch.

Need more help with this?
Spectrasonics Customer Support

Thanks for your feedback.