FX - Quad Resonator

 

This unit is based on four parallel comb filters that can add tuned resonances to any input signal. Comb filters create a "metallic" ringing effect and are created by feeding a sound back into itself and mixing the two signals. The positional relationship of the mixed signals effects the resultant pitch, resonance, and "springiness."

 

• PAGE ONE CONTROLS

WET MIX SLIDER

Controls the mix of the dry signal and the processed (wet) signal. The percentage indicates the amount of the signal that is wet. Range: 0 to 100%

PITCH 1, 2, 3, 4

Controls the pitch offset of the Resonators in relation to the Note value.

NOTE

Reference pitch from which Pitch 1-4 knobs will be offset.

FEEDBACK

This knob controls how much of each Resonator's output is fed back into itself. The higher the setting, the more resonant the results will be.

+/-

This knob controls the direction in which signals are delayed before they are added to the input.

 

• PAGE TWO CONTROLS

LEVEL 1, 2, 3, 4

Controls the level of Resonators on Page 1.

MASTER

Controls the overall level of Resonators 1-4.

SPREAD

This knob affects the pan positions of each of the four Resonators. At the minimum value, all four Resonators are panned to the center. At the maximum value, Resonators 1 and 3 are panned full left and Resonators 2 and 4 are panned full right.

TONE

This knob controls the Cutoff of a 6db Lowpass filters applied into the internal feedback loop of the resonators to provide a damping result. At the minimum setting, the sound will be darker and at higher settings, brighter.